木质素改性酚醛树脂的合成及其模塑料的性能  

Synthesis technology of lignin modified phenolic resin and properties of its moulding compounds

作　　者：黄世俊 童跃进[2] 苏志忠[3] 陈银桂 艾生儿 张振伟 HUANG Shi-jun;TONG Yue-jin;SU Zhi-zhong;CHEN Yin-gui;AI Sheng-er;ZHANG Zhen-wei(Shaxian Hongsheng Plastic Co.,Ltd.,Sanming 365500,China;College of Chemistry and Material Science,Fujian Normal University,Fuzhou 350007;College of Resources and Chemical Engineering,Sanming University,Sanming 365004,China)

机构地区：[1]沙县宏盛塑料有限公司,三明365500 [2]福建师范大学化学与材料学院,福州350007 [3]三明学院资源与化工学院,三明365004

出　　处：《复合材料科学与工程》2021年第11期102-107,共6页Composites Science and Engineering

摘　　要：采用正交实验研究了摩尔比(A)、木质素用量(B)、催化剂量(C)等3个因素对木质素改性酚醛树脂性能的影响,以木质素改性酚醛树脂为基体制备了模塑料并对其性能进行了测试。正交实验结果表明:木质素用量对聚速、游离酚、废水酚和苯酚反应率具有最主要影响,催化剂用量是黏度和软化点的最主要影响因素。在本研究范围内,制备模塑料用的木质素改性酚醛树脂的优选实验方案为:摩尔配比为0.84、木质素用量为10%、催化剂用量为0.9%,采用木质素改性酚醛树脂制备的模塑料具有更好的机械性能和耐热性能。The effects of the molar ratio of the raw materials,quantity of lignin,amount of catalyst on the properties of the modified phenolic resin were studied by orthogonal test.The phenolic moulding compounds was prepared based on lignin modified phenolic resin and its properties were tested.The orthogonal results showed that the amount of lignin was the key influencing factor of the curing time,free phenol of resin and waste water,the response rate of phenol.While the quantity of catalyst was the key influencing factor of the viscosity and soften point.For this research,the optimum synthetic parameters of lignin modified phenolic resin suitable for composite were as follows:the molar ratio was 0.84,the amount of lignin was 10%,the quantity of catalyst was 0.9%.The moulding compounds based on lignin modified phenolic resin had better physical performance and thermotolerant performance.

关 键 词：木质素 酚醛树脂 正交实验 模塑料 复合材料 

分 类 号：TB332[一般工业技术—材料科学与工程]