浅埋煤层大采高加长工作面“三机”配套研究及应用  

Research and application of three-machine equipment matching in extended high-cutting mining face in shallow coal seam

作　　者：吕情绪 肖剑儒 满洋 LYU Qing-xu;XIAO Jian-ru;MAN Yang(CHN Energy Shendong Technology Institute,Shenmu 719300,China;Production Management Division,CHN Energy Shendong Coal Group,Shenmu 719300,China;Electromechanical Management Division,CHN Energy SKendong Coal Group,Shenmu 719300,China)

机构地区：[1]国家能源集团神东技术研究院,陕西神木719300 [2]国能神东煤炭集团有限责任公司生产管理部,陕西神木719300 [3]国能神东煤炭集团有限责任公司机电管理部,陕西神木719300

出　　处：《煤炭工程》2021年第11期81-85,共5页Coal Engineering

摘　　要：为了确定浅埋煤层大采高加长工作面"三机"的合理配套,以上湾矿为工程背景,综合运用理论分析及数值模拟对工作面的设备选型进行校核,并对大采高加长工作面的现场应用效果进行分析。研究结果表明:工作面长度增加后采煤机割煤能力应大于3404t/h,刮板输送机功率应大于3341kW,液压支架支护强度应大于1.4MPa。现场应用效果表明工作面预选用设备均能满足生产要求,且实际生产中各设备运行情况良好。In order to determine the reasonable matching of extended mining face in the shallow seam with large mining height, taking 22104 mining face of Shangwan Mine as the engineering background, the equipment selection of mining face is comprehensively studied using theoretical analysis, numerical simulation and field monitoring.The results show that, when the extended mining face length is 330 m, the coal cutting capacity of shearer should be greater than 3404 t/h, the power of scraper conveyor should be greater than 3341 kW,and the support strength of hydraulic support should be greater than 1.1 MPa.The pre-selected equipment of 22104 mining face can meet the production requirements, and each equipment runs well in actual production.

关 键 词：浅埋煤层 大采高 加长工作面 “三机”配套 

分 类 号：TD822.1[矿业工程—煤矿开采]