基于可选接触迹线的点接触抛物线齿面构建及滑动系数计算方法研究  

Study on Point Contact Parabolic Tooth Surface Construction and Sliding Coefficient Calculation Method based on Selectable Contact Trail

作　　者：彭帅 张靖 王林翔 Peng Shuai;Zhang Jing;Wang Linxiang(School of Intelligent Manufacturing Engineering,Chongqing University of Arts and Sciences,Chongqing 402160,China;Zhejiang Shuanghuan Driveline Co.,Ltd.,Hangzhou 311100,China;School of Mechanical Engineering,Zhejiang University,Hangzhou 310027,China)

机构地区：[1]重庆文理学院智能制造工程学院,重庆402160 [2]浙江双环传动机械股份有限公司,浙江杭州311100 [3]浙江大学机械工程学院,浙江杭州310027

出　　处：《机械传动》2021年第12期15-21,共7页Journal of Mechanical Transmission

基　　金：重庆市自然科学基金面上项目(cstc2019jcyj-msxmX0586);机械传动国家重点实验室开放基金(SKLMT-MSKFKT-202017);重庆文理学院人才引进项目(R2018SJD18)。

摘　　要：提出了一种新型点接触齿轮副。在已知齿面上根据设计需要选取灵活的接触迹线,构建出与之啮合的配对齿轮,并推导出新齿轮副的滑动系数计算方法;设计出以渐开线齿轮作为已知齿轮、抛物线齿轮为配对齿轮的平行轴内齿轮副。研究结果表明,该齿轮副在啮合过程中时刻保持点接触状态,啮合点沿着理论接触迹线移动,与理论分析一致;滑动系数的变动范围取决于在齿轮两端选取啮入点和啮出点所对应的渐开线参数值。A new type of point contact gear pair is proposed.Based on a tooth surface,the flexible contact trail is selected according to the design requirements,and the meshing pair gear is constructed,and the sliding coefficient calculation method of the new gear pair is deduced.Taking the involute internal gear as the given gear and the parabolic gear as the matching gear,an internal gear pair is designed.The results show that during the whole meshing process,the gear pair keeps point contact state at all times,and the meshing point moves along the theoretical contact trail,which is consistent with the theoretical analysis.The variation range of the sliding coefficient mainly depends on the involute parameter values corresponding to the entry and exit points selected at both ends of the gear.

关 键 词：接触迹线 抛物线齿面 法矢量扫掠法 滑动系数 

分 类 号：TH132.41[机械工程—机械制造及自动化]