样品整经工艺对安全气囊用织物抗滑移性能的影响  

Effect of sample warping processes on the slip resistance property of airbag fabrics

作　　者：庄建国 李永贵[2] 陆振乾[3] Zhuang Jianguo;Li Yonggui;Lu Zhenqian(Kolon NanJing Co.Ltd,Nanjing 210046,China;Fujian Key Laboratory of Novel Functional Textile Fibers and Materials,Minjiang University,Fuzhou 350108,China;College of Textile and Fashion,Yancheng Institute of Technology,Yancheng 224051,China)

机构地区：[1]可隆(南京)特种纺织品有限公司,江苏南京210046 [2]闽江学院福建省新型功能性纺织纤维及材料重点实验室,福建福州350108 [3]盐城工学院纺织服装学院,江苏盐城224051

出　　处：《产业用纺织品》2021年第10期15-18,39,共5页Technical Textiles

摘　　要：介绍了安全气囊用织物的参数设计和生产工艺,测试了采用样品整经和分批整经两种整经方法所制备织物的力学性能。结果表明,采用样品整经法可明显提高安全气囊用织物的抗滑移性能。通过对织物经纱取向度和纬向横截面中经纱对纬纱包围角的计算,进一步分析了样品整经法可提高安全气囊用织物抗滑移性能的原因。The parameter design and production process of the airbag fabric were introduced. The mechanical properties of airbag fabrics prepared by sample warping and batch warping were measured. The results showed that the slip resistance property of the airbag fabrics by using sample warping method was improved, and the reason was further analyzed by calculating the warp orientation and the wrap angle formed by the warp yarn to the weft in the weft cross-section.

关 键 词：安全气囊 样品整经 抗滑移性能 取向度 

分 类 号：TS105.2[轻工技术与工程—纺织工程]