纳米聚吡咯对硅烷膜耐蚀性的影响  

Effect of nano-polypyrrole on corrosion resistance of silane films

作　　者：许潇雨 李丽 王建荣[1] 段广彬[1] XU Xiaoyu;LI Li;WANG Jianrong;DUAN Guangbin(School of Material Science and Engineering,University of Jinan,Jinan 250022,China)

机构地区：[1]济南大学材料科学与工程学院,山东济南250022

出　　处：《中国粉体技术》2021年第6期70-74,共5页China Powder Science and Technology

基　　金：国家自然科学基金项目,编号:51501072。

摘　　要：采用化学原位聚合法制备纳米级聚吡咯(PPy),对硅烷偶联剂KH-792进行掺杂改性,以提高硅烷膜的耐蚀性。通过电化学阻抗谱(EIS)确定聚吡咯对于硅烷溶液的最佳掺杂量,即得到耐蚀性最佳的改性硅烷膜,将此改性硅烷膜浸泡腐蚀不同时间,并与相同腐蚀条件下的单一硅烷膜比较,通过电化学阻抗谱及等效拟合电路数据,探讨改性硅烷膜的耐蚀机理。结果表明,PPy改性KH-792硅烷膜与单一KH-792硅烷膜相比,耐蚀性明显提高,约为单一硅烷膜的4倍。改性硅烷膜在腐蚀初期的耐蚀性主要来自膜层的机械屏蔽作用,腐蚀中后期则是聚吡咯在基片表面形成了钝化膜。In this paper,KH-792 silane was modified by nanoscale polypyrrole prepared by chemical in-situ polymerization to improve the anticorrosion of silane films. The optimal doping amount of polypyrrole for silane solution was determined by electrochemical impedance spectroscopy(EIS),and the modified film with the best corrosion resistance was obtained. The corrosion resistance mechanism of the modified film was investigated by EIS and equivalent circuit fitting data,comparing with the single silane film under the same corrosion condition. The conclusion is that the corrosion resistance of modified film is significantly improved,about 4 times that of a single silane film. The initial corrosion resistanceof modified film is mainly due to the mechanical shielding effect,and the middle and later stage of corrosion resistance is due to the passivation film formed by polypyrrole.

关 键 词：纳米聚吡咯 硅烷膜 耐蚀性 电化学 

分 类 号：TG174.4[金属学及工艺—金属表面处理]