脉冲喷吹金属长滤袋的清灰性能  

Cleaning performance of pulse injection on long metal filter bag

作　　者：李朋 薛峰 康彦 马小辉 颜翠平[1] 陈海焱[1] 侯力强 钱云楼 LI Peng;XUE Feng;KANG Yan;MA Xiaohui;YAN Cuiping;CHEN Haiyan;HOU Liqiang;QIAN Yunlou(School of Environment and Resource,Southwest University of Science and Technology,Mianyang 621010,China;Xi'an Filter Metal Materials Co.Ltd.,Xi'an 710000,China;Zhejiang College of Security Technology,Wenzhou 325016,China)

机构地区：[1]西南科技大学环境与资源学院,四川绵阳621010 [2]西安菲尔特金属过滤材料有限公司,陕西西安710000 [3]浙江安防职业技术学院,浙江温州325016

出　　处：《中国粉体技术》2021年第6期121-126,共6页China Powder Science and Technology

基　　金：温州市科技局基础性科研项目,编号:G20180031。

摘　　要：为了探究金属长滤袋的清灰性能,搭建脉冲喷吹平台,以直径为160 mm、长度为6 m金属滤袋为对象,探究在不同喷吹条件下,金属长滤袋的最优清灰参数以及沿滤袋方向上侧壁压力峰值的分布规律。结果表明:在喷吹压力为0.4 MPa时,金属长滤袋的最佳喷吹孔径为16 mm,喷吹距离为200 mm;此条件下,滤袋的中部测点P_(3)、P_(4)、P_(5)压力值分别为0.87、0.75、0.77 kPa,均大于300 Pa,满足有效清灰要求。金属长滤袋的侧壁压力峰值呈现出上部>下部>中部的变化趋势。In order to explore the cleaning performance of long metal filter bag,a pulse injection platform was built to study the optimum design and the pressure distribution under different pulse-jet conditions,taking thelong metal filter bagwith the diameter of 160 mm and length of 6 m as examples.The experimental results show that when the pulse pressure is 0.4 MPa,the optimum nozzle is 16 mm and the optimum jetdistance is 200 mm for the long metal filter bag.Under this condition,the pressure values of P_(3),P_(4),and P_(5) in the middle part of the metal filter bag are 0.87,0.75 and 0.77 kPa,respectively,and all greater than 300 Pa,meeting the requirements of effective cleaning.The pressure peaks of the metal filter bag show a variation trend of upper part>bottom part>middle part.

关 键 词：金属材料 长滤袋 压力峰值 脉冲喷吹 

分 类 号：X93[环境科学与工程—安全科学]