检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:何鹏飞[1,2,3,4] 马巍 穆彦虎 董建华 黄永庭[2,4] HE Pengfei;MA Wei;MU Yanhu;DONG Jianhua;HUANG Yongting(School of Science,Lanzhou University of Technology,Lanzhou 730050,China;State Key Laboratory of Frozen Soil Engineering,Northwest Institute of Eco-Environment and Resources,Chinese Academy of Sciences,Lanzhou 730000,China;School of Civil Engineering,Lanzhou University of Technology,Lanzhou 730050,China;University of Chinese Academy of Sciences,Beijing 100049,China)
机构地区:[1]兰州理工大学理学院,甘肃兰州730050 [2]中国科学院西北生态环境资源研究院冻土工程国家重点实验室,甘肃兰州730000 [3]兰州理工大学土木工程学院,甘肃兰州730050 [4]中国科学院大学,北京100049
出 处:《中南大学学报(自然科学版)》2021年第11期4148-4157,共10页Journal of Central South University:Science and Technology
基 金:国家自然科学基金资助项目(42001058);中国科学院科研仪器设备研制项目(28Y928581)。
摘 要:考虑基土冻胀作用于衬砌的法向冻胀力与界面冻结力的关系,基于弹性地基梁理论,建立开放系统中梯形渠道衬砌的冻胀破坏力学模型,使用解析法得到衬砌冻胀变形和内力解。通过与原型渠道及已有研究的冻胀变形进行对比,验证计算的正确性。研究结果表明:坡板最大冻胀变形发生在距离坡脚43%坡板长度处,最大弯矩发生在距离坡脚25%坡板长度处,这与已有的研究成果中梯形渠道衬砌破坏主要发生在距离渠坡坡脚25%~45%坡板长度处吻合。当考虑界面冻结力时,冻结力对挠度和剪力影响较小,而对弯矩的影响较大。界面的冻结力相当于作用于梁上的偏心拉压荷载,对弯矩有正叠加作用。因此,当仅考虑衬砌的刚度时,可不考虑冻结力的影响;但当重点考虑衬砌的强度时,应考虑界面冻结力的影响。The relationship between the normal frost-heave force and the interface adfreeze force was considered,the frost heave failure mechanical model of the trapezoidal channel lining in the open system was established based on the elastic foundation beam theory, and the analytical solution was obtained to calculate deformation and internal force of lining. The correctness of the calculation was verified against an existing experimental and analytical results. The results show that the maximum frost-heave displacement of the slope lining occurs at distance from the position of 43% of the slope lining based on an engineering case, and the maximum bending moment occurs at distance from the position of 25% of the slope lining. This is corresponding to the existing result that the lining failure takes place at a distance of 25% to 45% lining length from the toe. Moreover, the interface adfreeze force has a little effect on deflection and shear force of the lining, but it has a greater effect on the bending moment of lining. The adfreeze force is an eccentric load acting on the beam, and has a positive superimposition effect on the bending moment. Therefore, in the design process, when only the stiffness of the lining is considered, the effect of adfreeze force may not be considered;but when focusing on the strength of the lining, the influence of the interface adfreeze force should be considered.
分 类 号:TV31[水利工程—水工结构工程] S277[农业科学—农业水土工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28