西宁市金属冶炼和压延加工业大气颗粒物排放清单  

Study on Emission Inventory of Atmospheric Particulate Matter from Metal Smelting and Rolling Processing Industry in Xining City

作　　者：唐真真 王宝庆[1] 丛晓晓 温美玲 蔡宁宁 李怡诺 TANG Zhenzhen;WANG Baoqing;CONG Xiaoxiao;WEN Meiling;CAI Ningning;LI Yinuo(College of Environmental Science and Engineering,Nankai University,Tianjin 300350,China;Qinghai Jieshen Environment Energy Industry Co,Ltd,Xining 810000,China;Xining Ecology and Environment Bureau,Xining 810000,China)

机构地区：[1]南开大学环境科学与工程学院,天津300350 [2]青海洁神环境能源产业有限公司,青海西宁810000 [3]西宁市生态环境局,青海西宁810000

出　　处：《中国环境监测》2021年第6期111-117,共7页Environmental Monitoring in China

基　　金：国家自然科学基金资助项目(21777076);西宁市大气污染源清单编制及空气质量达标规划项目(2018-016)。

摘　　要：大气污染物排放清单是了解大气污染特征和控制对策的前提。根据排放因子方法,建立了2018年西宁市金属(包括黑色和有色金属)冶炼和压延加工业PM_(2.5)、PM_(10)大气污染物的排放清单,并对其时空分布特征和清单不确定性进行了分析。结果表明:西宁市黑色金属冶炼和压延加工业PM_(2.5)、PM_(10)的总排放量分别是4.88×10^(3)、8.37×10^(3) t;该行业对PM_(2.5)、PM_(10)排放量贡献率最大的是城北区,分别为58.36%、49.61%。有色金属冶炼和压延加工业PM_(2.5)、PM_(10)的总排放量分别是1.85×10^(3)、2.78×10^(3) t,该行业对PM_(2.5)、PM_(10)贡献率最大的是大通县,分别为53.51%、56.99%。黑色金属冶炼和压延加工业对PM_(2.5)、PM_(10)贡献率最大的产业是粗钢产业,贡献率分别是38.41%、30.28%。有色金属冶炼和压延加工业对PM_(2.5)、PM_(10)贡献率最大的是铝行业,贡献率分别是97.33%和98.01%。2个行业PM_(2.5)和PM_(10)的排放受月份影响较小,一天中09:00—18:00是排放高峰期。蒙特卡罗法模拟结果表明:黑色金属冶炼和压延加工业95%置信区间的不确定性较高,PM_(2.5)和PM_(10)的不确定性分别为-59.33%~58.55%和-47.51%~47.28%。The study of air pollutant emission inventory is key to understand the characteristics and control measures of air pollution.According to the emission factor method,the emission inventory of metal smelting and rolling processing industry for PM_(2.5) and PM_(10) Xining in 2018 was established,and the spatial and temporal distribution characteristics and inventory uncertainties were analyzed in Xining.The results showed that the total emissions of PM_(2.5) and PM_(10) in Xining ferrous metal smelting and rolling processing industry were 4.88×10^(3) t and 8.37×10^(3) t,respectively and this industry contributed mostly to PM_(2.5) and PM_(10) emissions in the north district,with 58.36%and 49.61%,respectively.The total emissions of PM_(2.5) and PM_(10) in non-ferrous metal smelting and rolling processing industry were 1.85×10^(3) t and 2.78×10^(3) t respectively,and the largest contribution rate of this industry to PM_(2.5) and PM_(10) was 53.51%and 56.99%in Datong County,respectively.The crude steel processing in ferrous metal smelting and rolling processing industry contributed mostly to PM_(2.5) and PM_(10) with 38.41%and 30.28%,respectively.The aluminum processing in non-ferrous smelting and rolling processing contributed mostly to PM_(2.5) and PM_(10) with 97.33%and 98.01%,respectively.The emissions of PM_(2.5) and PM_(10) in the two industries were less affected by the month,with the peak between 09:00 and 18:00 in a day.The simulation results by Monte Carlo method showed that the uncertainties with the 95%confidence interval of PM_(2.5) and PM_(10) from ferrous metal smelting and rolling processing were more with-59.33%-58.55%and-47.51%-47.28%,respectively.

关 键 词：黑色和有色金属冶炼、压延加工业 排放清单 PM_(2.5) PM_(10) 西宁市 

分 类 号：X823[环境科学与工程—环境工程]