棒材五连轧过程三维热力耦合有限元模拟分析  

Three dimensional thermo mechanical coupling finite element simulation analysis of bar five continuous rolling process

作　　者：王瑞章 唐立志 章小峰 黄贞益 Wang Ruizhang;Tang Lizhi;Zhang Xiaofeng;Huang Zhenyi(Bar Factory of Nanjing Iron&Steel Co.,Ltd.,Nanjing 210000,China;Anhui University of Technology,School of Metallurgical Engineering,Maanshan 243032,China)

机构地区：[1]南京钢铁股份有限公司中棒厂,江苏南京210000 [2]安徽工业大学冶金工程学院,安徽马鞍山243032

出　　处：《金属制品》2021年第6期32-35,共4页Metal Products

摘　　要：运用某三维热力耦合有限元模拟仿真软件,对坯型断面为250 mm×300 mm的GCr15钢进行五道次连轧的仿真模拟。对轧件在变形过程中的应变场、温度场以及轧制力的分布特点进行分析。模拟结果表明,轧件的变形主要集中在表层区域,轧件头部会出现内凹现象;轧件顶部圆角处可能会在第5道次产生裂纹;各道次轧制力的模拟值与实测值的相对误差较小。Using three dimensional thermo mechanical coupling finite element simulation software,the simulation of GCr15 steel with a billet section of 250 mm×300 mm was carried out in five successive rolling passes.Metal flow law,temperature distribution and related rolling process parameters during deformation process of rolled piece was analyzed.The simulation results show that deformation of rolled piece is mainly concentrated in surface area,and the head of rolled piece will be concave.Cracks may occur at the top fillet of rolled piece in fifth pass;Each pass relative error of rolling force between simulated and measured is small.

关 键 词：连轧 工艺参数 有限元 模拟分析 

分 类 号：TG335.6[金属学及工艺—金属压力加工]