镍包石墨添加相对Ni60-WC复合涂层性能的影响  

Study on the Effect of Nickel-coated Graphite Addition on thePerformance of Ni60-WC Composite Coating

作　　者：朱克亮 刘宁[1] 朱协彬[1] 张伟 刘宏伟 魏敏 李树军 ZHU Keliang;LIU Ning;ZHU Xiebin;ZHANG Wei;LIU Hongwei;WEI Min;LI Shujun(School of Materials Science and Engineering,Anhui Polytechnic University,Wuhu 241000,China;Research and Development Department,Institute of Remanufacturing Industry Technology,Cangzhou 062450,China)

机构地区：[1]安徽工程大学材料科学与工程学院,安徽芜湖241000 [2]京津冀再制造产业技术研究院研发部,河北沧州062450

出　　处：《安徽工程大学学报》2021年第6期1-9,共9页Journal of Anhui Polytechnic University

基　　金：河北省重点研发计划基金资助项目(21373803D);国防科技重点实验室基金资助项目(6142005180208)。

摘　　要：研究采用超音速火焰喷涂技术(HVOF)在45钢基体表面制备了不同镍包石墨掺杂含量(5 wt.%、10 wt.%、15 wt.%)的Ni60-WC复合涂层,对粉末的显微组织和涂层的显微组织、力学性能以及耐磨耐蚀性能进行了研究。结果表明:Ni60-WC粉末呈球形或椭球形形貌,物相组成主要有(Fe,Ni)_(23)C_(6)、Ni、WC等;镍包石墨粉末呈不规则形状,物相组成有Ni和石墨;两种粉末的粒径分布范围主要在15~45μm。涂层致密且与基体结合紧密,显现出层状结构,涂层的物相组成主要有Ni、WC、CrSi和石墨相等,涂层的孔隙率均在1%~2%左右,涂层的显微硬度均在700~800 HV左右,Ni60-WC+15 wt.%Ni-C复合涂层表现出更佳的耐磨损和耐腐蚀性能。HVOF is used to prepare Ni60-WC composite coatings with different nickel-coated graphite doping content(5 wt.%,10 wt.%,15 wt.%)on the surface of 45 steel substrate.The Microstructure of powder and the microstructure,mechanical properties,wear and corrosion resistance of the coating were studied.The results show that the Ni60-WC powder has a spherical or ellipsoidal morphology,and the phase composition mainly includes(Fe,Ni)_(23)C_(6),Ni,WC,etc.;the nickel-coated graphite powder has an irregular shape,and the phase composition includes Ni and graphite;The particle size distribution range of this powder is mainly with 15~45μm.The coating is dense and closely combined with the substrate,showing a layered structure.The phase composition of the coating is mainly equal to Ni,WC,CrSi and graphite.The porosity of the coating is about 1%~2%.The hardness is about 700~800 HV,and the Ni60-WC+15 wt.%Ni-C composite coating shows better wear resistance and corrosion resistance.

关 键 词：超音速火焰喷涂 复合涂层 微观组织 耐磨耐蚀 

分 类 号：TG174.4[金属学及工艺—金属表面处理]