检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈忠辉 杨军[1] 汤宇 翟小鹏 CHEN Zhong-hui;YANG Jun;TANG Yu;ZHAI Xiao-peng(Key Laboratory of Explosion Science and Technology,Beijing 100081,China)
机构地区:[1]北京理工大学爆炸科学与技术重点实验室,北京100081
出 处:《工程爆破》2021年第6期39-43,共5页Engineering Blasting
基 金:科研专项基金资助项目(YBKT9-03)。
摘 要:为了研究截顶M型药型罩的结构对聚能射流的性能影响,利用ANSYS/LS-DYNA对9组聚能装药结构进行数值模拟分析。通过改变药型罩截顶宽度和V型开口宽度,分析聚能射流的速度、长度以及连续性变化。结果表明,在9组不同的方案中,射流的速度随着药型罩截顶宽度和V型开口宽度的增加呈现先增加后减小的趋势。当截顶宽度为1.2 cm,V型开口宽度为0.4 cm时,射流的形态更好,射流头部速度最大,为6007 m/s。In order to study the influence of the truncated M-shaped charge cover on the shaped charge jet,ANSYS/LS-DYNA was used to simulate and analyze the performance of 9 groups of shaped charge.By changing the width of the truncated cap and the width of the V-shaped opening,the velocity,length and continuity of the shaped jet were analyzed.The results show that in the 9 schemes,the velocity of the shaped jet increases first and then decreases with the growing of the truncated width and the V-shaped opening width.When the truncated width is 1.2 cm and the V-shaped opening width is 0.4 cm,the shape of the jet is better and the jet head velocity reaches the maximum,6007 m/s.
关 键 词:ANSYS/LS-DYNA 聚能射流 截顶M型药型罩 数值模拟
分 类 号:TJ51[兵器科学与技术—军事化学与烟火技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.229