基于COMSOL和正交试验的注塑模具电磁感应加热工艺参数优化  

Parameters Optimization of Electromagnetic Induction Heating for Injection Mold Based on COMSOL and Orthogonal Experiment

作　　者：王金莲[1] 毕明铖 许忠斌[2] 单岩[2] 周后盘 WANG Jin-lian;BI Ming-cheng;XU Zhong-bin;SHAN Yan;ZHOU Hou-pan(School of Intelligent Manufacturing,Hangzhou Polytechnic,Hangzhou 311402,China;School of Energy Engineering,Zhejiang University,Hangzhou 310027,China;School of Automation,Hangzhou Dianzi University,Hangzhou 310018,China)

机构地区：[1]杭州科技职业技术学院智能制造学院,浙江杭州311402 [2]浙江大学能源工程学院,浙江杭州310027 [3]杭州电子科技大学自动化学院,浙江杭州310018

出　　处：《塑料工业》2021年第12期82-85,33,共5页China Plastics Industry

基　　金：浙江省教育厅一般科研项目(Y201941430);浙江大学项目(合同号:校合-2020-KYY-533005-0041)。

摘　　要：基于COMSOL有限元软件对圆形外壳件注塑模型腔电磁感应加热进行了磁热耦合数值模拟,并用正交试验法对分析结果以加热效率和温度均匀性为优化目标进行多因子多水平分析。结果表明,影响加热效率的最主要因素是电流大小,其次为线圈距型腔的距离、电源频率;影响温度分布均匀性的最主要因素也是电流大小,其次为电源频率、线圈距型腔的距离。运用综合平衡法确定最优参数组合为线圈距型腔7 mm,频率30 kHz,电流600 A,此时加热至120℃的时间为35 s,模腔温差9.927℃,符合指标限制要求。研究为可靠有效的线圈外置式注塑模腔感应加热系统实际工程应用提供指导。Based on COMSOL finite element software, magnetic thermal coupling numerical simulation of electromagnetic induction heating for injection mold cavity for circular shell parts was carried out.And the analysis results are analyzed with orthogonal experiment.Taking the heating efficiency and temperature uniformity as the optimization objectives, the results show that the main factor affecting the heating efficiency is the current, followed by the distance between the coil and the cavity, power frequency.The most important factor affecting the uniformity of temperature distribution is the current, followed by the power frequency and the distance between the coil and the cavity.The optimal parameter combination determined by the comprehensive balance method, which the coil is 7 mm away from the mold cavity, the frequency is 30 kHz, the current is 600 A,the heating time to 120 ℃ is 35 s, and the mold cavity temperature difference is 9.927 ℃,which meets the limit requirements.This work may provide guidance for the practical engineering application of reliable and effective induction heating system for coil external injection mold cavity.

关 键 词：注塑模具 电磁感应加热 COMSOL 正交试验 参数优化 

分 类 号：TQ320.5[化学工程—合成树脂塑料工业]