压水堆堆芯Pin-by-pin均匀化计算中非均匀泄漏修正模型研究  

Heterogeneous Leakage Model for PWR Pin-by-pin Homogenization Calculation

作　　者：张斌[1,2] 李云召[2] 吴宏春[2] ZHANG Bin;LI Yunzhao;WU Hongchun(Science and Technology on Reactor System Design Technology Laboratory,Nuclear Pover Institute of China,Chengdu 610041,China;School of Nuclear Science and Technology,Xi an J iaotong University,Xi an 710049,China)

机构地区：[1]中国核动力研究设计院核反应堆系统设计技术重点实验室,四川成都610041 [2]西安交通大学核科学与技术学院,陕西西安710049

出　　处：《原子能科学技术》2022年第1期46-52,共7页Atomic Energy Science and Technology

摘　　要：在压水堆堆芯Pin-by-pin均匀化计算中采用均匀泄漏修正模型及非均匀泄漏修正模型对组件计算的中子能谱进行修正,本文研究了Pin-by-pin均匀化计算中均匀泄漏修正模型及非均匀泄漏修正模型的实现方式,提出了非均匀泄漏修正模型和栅元均匀化方法的联合实现方式,并分析比较了不同栅元均匀化扩散系数产生方式的计算效果。数值结果表明,非均匀泄漏修正模型及由其产生的中子泄漏系数能有效提高压水堆堆芯Pin-by-pin计算的精度。The assembly-homogenized two-step scheme was developed to provide efficient solutions with an acceptable accuracy for pressurized water reactor(PWR)core calculation.However,because of the effective boundary condition performed in the assembly calculations,neither the axial nor radial leakage rate is considered within the heterogeneous assembly calculation.The heterogeneous flux spectrum is far from the actual flux spectrum in the core named global spectrum.The previous studies show that the homogeneous leakage model works effectively for the assembly homogenization.The leakage model is used to modify the flux to get the more consistent assembly-homogenized few-group constants,it is also employed to obtain the diffusion coefficients for core calculation.Within the homogeneous leakage model,the heterogeneous assembly is treated as an equivalent homogeneous medium and the axial or radial leakage rate is exactly same under the specific buckling.However,it becomes different and unsettled for the Pin-by-pin homogenization,the assumption that the neutron flux is homogeneous and the leakage rate is uniform over the lattice pitch is no longer valid for Pin-by-pin calculation,especially when poison pins or empty channels are present in the fuel assembly.Thus,homogeneous and heterogeneous leakage models used in Pin-by-pin calculation scheme were evaluated in this paper.The derivation of the formula of the leakage model was introduced,and the implements of homogeneous and heterogeneous leakage models used in Pin-by-pin homogenization of the lattice calculation were studied.The homogeneous leakage model applied in Pin-by-pin homogenization will lead to the same corrective factor to correct the neutron flux and the current,while the diffusion coefficient based on Fick’s law would be utilized in the core calculation.When the heterogeneous leakage model is applied,a consistent method of cooperation between the heterogeneous leakage model and the pin-cell homogenization theory is proposed.Before buckling search of the heterogen

关 键 词：非均匀泄漏修正模型 Pin-by-pin均匀化计算 扩散系数 

分 类 号：TL329.2[核科学技术—核技术及应用]