激光诱导荧光技术在氯化法钛白氧化炉混合效果分析中的应用  

Application of laser induced fluorescence technology in mixing effect analysis of oxidation furnace at titanium dioxide via chloride process

作　　者：孙洪涛[1] 倪小敏[2] 王玥 解为清 杨国强[1] Sun Hongtao;Ni Xiaomin;Wang Yue;Xie Weiqing;Yang Guoqiang(East China Engineering Science and Technology Co.,Ltd.,Hefei 230024,Anhui,China;State Key Laboratory of Fire Science,University of Science and Technology of China,Hefei 230027,Anhui,China)

机构地区：[1]东华工程科技股份有限公司,安徽合肥230024 [2]中国科学技术大学,火灾科学国家重点实验室,安徽合肥230027

出　　处：《钢铁钒钛》2021年第5期84-91,共8页Iron Steel Vanadium Titanium

摘　　要：氯化法生产钛白是现今国际上钛白工业的主流生产技术,而氧化反应器的结构设计是氯化法生产钛白的一项关键技术。TiCl_(4)和O_(2)的混合情况对于钛白粉的颗粒粒径及分布、颗粒晶型等产品性能有决定性作用,进而影响到产品的质量。因此,掌握不同工况条件下两种物料气流混合效果,对于氧化反应器的设计以及实际操作参数的优化具有重要意义。然而,现有的研究工作表明,传统的测量技术难以适应复杂流场的高速、非稳定等特性,迫切需要高精度的现代诊断技术。该研究从试验方法上进行了创新,采用无扰动非接触的激光诱导荧光技术(LIF)测量了不同工况下模拟反应器内不同位置处的气体浓度分布,研究了两股气体在不同结构氧化炉及不同物料比下的混合效果及其变化规律,找出了影响混合效果的关键因素。该研究为氧化炉的结构设计和操作工艺条件的控制提供必要的参考,为相关理论模型和数值仿真提供重要的试验参数,对于促进我国钛白生产工艺的发展具有重要的科学意义和实际意义。Titanium dioxide(TiO_(2))through chloride process is the mainstream production technology of titanium dioxide industry in the world nowadays,and the structure design of oxidation reactor is a key technology for the production of titanium dioxide by chlorination.The mixture of TiCl_(4) and O_(2) plays a decisive role in the properties of TiO_(2),such as particle size,distribution and crystal shape,and then affects the quality of the product.Therefore,it is of great significance to monitor the mixing effect of two kinds of material airflow under different working conditions for the design of oxidation reactor and the optimization of practical operation parameters.However,the existing research shows that the traditional measurement technology is difficult to adapt to the characteristics of high speed and instability of complex flow field,so the modern diagnosis technology with high precision is urgently needed.Herein,using the undisturbed non-contact laser induced fluorescence(LIF)the gas concentration distribution in different location of the reactor was measured by simulation under different working condition.The mixing effect and its variation law of the two gases in different oxidation furnace structure and different materials were studied,and the key factors influencing the mixing effect were found out.This study provides necessary reference for the structure design of the oxidation furnace and the control of the operation process conditions,as well as important experimental parameters for the relevant theoretical model and numerical simulation.It shows important scientific and practical significance to promote the development of TiO_(2) production process in China.

关 键 词：钛白粉 氯化法 氧化反应器 气流混合 激光诱导荧光技术 

分 类 号：TF823[冶金工程—有色金属冶金]