压水堆燃料组件轴向格架的中子学影响研究  

Neutronics Influence Research on Axial Grid of PWR Fuel Assembly

作　　者：黄星 万承辉 李云召[1] 吴宏春[1] 顾蔚泉 蔡光明 徐嘉隆 Huang Xing;Wan Chenghui;Li Yunzhao;Wu Hongchun;Gu Weiquan;Cai Guangming;Xu Jialong(School of Nuclear Science and Technology,Xi’an Jiaotong University,Xi’an,710049,China;Nuclear Energy Creative Power Co.,Ltd.,Xi’an,710077,China;Fujian Fuqing Nuclear Power Co.,Ltd.,Fuqing,Fujian,350318,China)

机构地区：[1]西安交通大学核科学与技术学院,西安710049 [2]西安核创能源科技有限公司,西安710077 [3]福建福清核电有限公司,福建福清350318

出　　处：《核动力工程》2022年第1期52-56,共5页Nuclear Power Engineering

基　　金：国家自然科学基金资助项目(12005164)。

摘　　要：基于先进压水堆燃料管理软件Bamboo-C,分别提出了轴向格架非均匀建模方法和均匀建模方法。采用轴向格架的2种不同建模方法,对福清核电厂M310堆型的燃料组件进行建模分析,通过与堆芯实测数据进行对比,检验2种不同建模方法对临界硼浓度、轴向功率分布及轴向功率偏移的影响。数值结果表明,压水堆燃料组件轴向非均匀建模方法能够显著提高堆芯关键物理参数的计算精度。The heterogeneous modeling method and homogenous modeling method have been respectively proposed for the axial grids based on the advanced fuel-management code for PWR named Bamboo-C. Based on these two different modeling methods for axial grids, modeling analysis for the fuel assemblies of M310 reactor in Fuqing Nuclear Power Plant is carried out. By comparing with the measured data of the reactor core, the effects of two different modeling methods on the critical boron concentration, axial power distribution and axial power offset are tested. The numerical results show that the axial heterogeneous modeling method of PWR fuel assembly can significantly improve the calculation accuracy of the key physical parameters of the reactor core.

关 键 词：轴向格架 中子学影响 非均匀建模方法 均匀建模方法 

分 类 号：TL334[核科学技术—核技术及应用]