检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王小吉 武铃珺[1] 朱大欢[1] 邓坚[1] 刘丽莉[1] 许幼幼 Wang Xiaoji;Wu Lingjun;Zhu Dahuan;Deng Jian;Liu Lili;Xu Youyou(Science and Technology on Reactor System Design Technology Laboratory,Nuclear Power Institute of China,Chengdu,610213,China)
机构地区:[1]中国核动力研究设计院核反应堆系统设计技术重点实验室,成都610213
出 处:《核动力工程》2022年第1期183-186,共4页Nuclear Power Engineering
摘 要:参考某百万千瓦级核电厂设计,针对堆内熔融物滞留(IVR)策略投入后晚期(即压力容器下封头已形成熔融池的情况下)可能的一回路再注水场景开展分析,研究晚期再注水的一回路压力响应。通过与不实施再注水事故工况的对比分析,综合评估实施再注水时间、再注水流量及严重事故泄压阀开启数量对一回路的压力影响,得到了各措施的影响规律,并针对严重事故管理策略提出建议。Based on the design of a million-kilowatt nuclear power plant, this article analyzed the possible late primary circuit reinjection scenarios in severe accidents when the In-Vessel Retention(IVR) measure is taken(that is, when the lower head of the pressure vessel has formed a melting pool), and studied the primary circuit pressure respond to the late reinjection. Through the comparative analysis of the condition with no reinjection, the influence of reinjection time,reinjection flow and the opening number of pressure relief valves in serious accidents on the pressure of the primary circuit were comprehensively evaluated, the influence law of each measure was obtained, and suggestions were put forward for severe accident management strategies.
关 键 词:严重事故 堆内熔融物滞留(IVR) 一回路注水
分 类 号:TL364[核科学技术—核技术及应用]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.28