检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:钟厉[1] 易迅杰 邓小强 韩西[1] 钟科 ZHONG Li;YI Xunjie;DENG Xiaoqiang;HAN Xi;ZHONG Ke(School of Mechatronics and Vehicle Engineering,Chongqing Jiaotong University,Chongqing 400074,China;Chongqing Longray Automotive Parts Co.,Ltd.,Chongqing 400026,China)
机构地区:[1]重庆交通大学机电与车辆工程学院,重庆400074 [2]重庆朗锐汽车零部件有限公司,重庆400026
出 处:《润滑与密封》2022年第1期127-133,共7页Lubrication Engineering
基 金:重庆市自然科学基金面上项目(cstc2020jcyj-msxmX0749);重庆市研究生联合培养基地项目(JDLHPYJD2020031);重庆市研究生导师团队建设项目(JDDSTD2019007)。
摘 要:为提高摩擦材料高温下的摩擦磨损性能和摩擦因数的稳定性,利用正交试验法对多种纤维增强酚醛树脂基摩擦材料的配方进行优化设计,并通过极差分析,探讨多种纤维及含量对摩擦材料性能的影响及摩擦材料的磨损机制。研究表明:混杂纤维增强树脂基摩擦材料有着优异的耐磨性。陶瓷纤维硬度较高,开散混料后能够均匀分布在树脂基体内,对酚醛树脂基摩擦材料硬度、内剪切强度以及摩擦因数影响最大;碳纤维具有耐高温、耐磨和自润滑的特性,其含量变化对酚醛树脂基摩擦材料磨损率影响最大;在高温下,碳纤维对磨损率影响更加显著,其在摩擦过程中逐渐磨损且分布至整个摩擦面,可显著地降低材料磨损率。纤维含量的不同致使磨损机制发生改变,主要磨损有磨粒磨损、热磨损、疲劳磨损和黏着磨损。To improve the high temperature friction and wear properties and the stability of friction coefficient of friction materials at high temperature,the formulation of various fiber reinforced phenolic resin based friction materials was optimized by orthogonal test.Through range analysis,the influence of various fibers and content on the performance of friction materials and the wear mechanism of friction materials were discussed.It is shown that hybrid fiber reinforced resin-based friction materials have excellent wear resistance.The ceramic fiber has high hardness and can be evenly distributed in the resin matrix after being dispersed and mixed,which has the greatest impact on the hardness,internal shear strength and friction coefficient of the phenolic resin friction material.The carbon fiber has the characteristics of high temperature resistance,wear resistance and self-lubrication,and its content change has the greatest impact on the wear rate of phenolic resin friction materials.At high temperatures,the carbon fiber has a more significant impact on the wear rate.It is gradually worn during the friction process and distributed to the whole friction surface,which can significantly reduce the material wear rate.The difference in fiber content causes the change of wear mechanism,and the main wear forms of the friction material are abrasive wear,thermal wear,fatigue wear and adhesive wear.
分 类 号:TH117[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.59.96.255