圆柱表面二次曲线轮廓型腔四轴数控宏程序编程及VERICUT仿真加工  

Four-axis NC Macro Programming and VERICUT Simulation Machining based on Cylindrical Surface Conic Profile Cavity

作　　者：耿晓明[1] 张德山 GENG Xiaoming;ZHANG Deshan(School of Mechanical and Electrical Engineering,Anhui Vocational College of Electricity and Information Technolgy,Bengbu 233030,China;Mechanical and Electrical Equipment Factory,Bengbu Triumph Engineer Technology Co.,Ltd.,Bengbu 233000,China)

机构地区：[1]安徽电子信息职业技术学院机电工程学院,安徽蚌埠233030 [2]蚌埠凯盛工程技术有限公司机电设备厂,安徽蚌埠233000

出　　处：《吉林化工学院学报》2022年第1期86-89,共4页Journal of Jilin Institute of Chemical Technology

基　　金：安徽省教育厅校企合作示范实训中心质量工程项目(2019xqsxzx)。

摘　　要：通过圆柱表面椭圆轮廓型腔进行数理分析,得出坐标参数间的关联,采用变量进行手工宏程序编程,并利用VERICUT软件模拟生产条件,对宏程序进行仿真加工验证,程序经仿真加工效果良好.故在类似曲线轮廓及其型腔加工时,可通过分析及构建加工曲线轮廓的相关参数联系,采用四轴宏程序编程的加工方式,有效发挥宏程序的编程优势完成数控加工,提高生产实效.Through the mathematical analysis of the elliptic contour cavity on the cylindrical surface,the correlation between the coordinate parameters was obtained.The manual macro program was programmed with variables,and the VERICUT software was used to simulate the production conditions to verify the simulation processing of the macro program,and the machining effect was good.In the processing of similar curve contour and its cavity structure,the relevant parameters of the curve contour can be analyzed and constructed,and the processing method of four-axis macro program can be adopted to give full play to the programming advantage of macro program effectively and improve the production effect.

关 键 词：二次曲线 型腔 四轴 宏程序 仿真 

分 类 号：TG54[金属学及工艺—金属切削加工及机床]