检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:付鹏[1] 刘洛航 杨卫平[1] 刘仁鑫[1] 张凯 郭文良 冷超群[3] FU Peng;LIU Luohang;YANG Weiping;LIU Renxin;ZHANG Kai;GUO Wenliang;LENG Chaoqun(College of Engineering,Jiangxi Agricultural University,Nanchang 330045,China;Jiangxi Zengxin Technology Co.,Ltd.,Xinyu 338000,China;School of Civil Engineering,Nanchang Institute of Technology,Nanchang 330044,China)
机构地区:[1]江西农业大学工学院,南昌330045 [2]江西增鑫科技股份有限公司,江西新余338000 [3]南昌理工学院建筑工程学院,南昌330044
出 处:《黑龙江畜牧兽医》2021年第24期76-82,147,共8页Heilongjiang Animal Science And veterinary Medicine
基 金:国家自然科学基金项目(31960683);江西省教育厅科技计划项目(GJJ180190);江西省现代生猪产业技术体系专项(赣财文指[2019]7号)。
摘 要:为了解决现代规模化生猪养殖场饲料输送过程中饲料输送能力差、输送距离短、破碎率高以及疫病防控等问题,笔者以满足年出栏万头猪的饲料供给能力为目标,设计了饲料气力输送系统及试验装置,即选用了额定压力为100 kPa、流量为12.5 m^(3)/min和功率为37 kW的罗茨风机,排量为0.01 m^(3)/r的旋转供料器,管径为83 mm的DN80镀锌钢管输送管道,筒体直径(Φ)为500 mm的旋风分离器,以及袋滤式除尘器,并对试验装置的饲料输送能力、管道压降、破碎率等输送性能进行验证。结果表明:试验装置输送能力的相对误差小于8.33%,输送能力的提高随系统管道压降的增加近似呈线性关系,饲料平均破碎率为11.50%;试验装置在工作过程中无管道粘料及弯管堵塞现象,各部件均工作正常,系统运行稳定可靠,性能指标满足设计要求。说明本试验设计猪饲料的气力输送系统可满足现代规模化生猪养殖。In order to solve the problems of poor feeding capacity,short feeding distance,high breakage rate as well as epidemic prevention and control in the feeding process of modern large-scale pig farms,in this paper,the feed pneumatic conveying system and test device were designed by author to meet the feed supply capacity of ten thousand pigs per year.Therefore,roots blower with rated pressure of 100 kPa,flow rate of 12.5 m^(3)/min and power of 37 kW,rotary feeder with displacement of 0.01 m^(3)/r,DN80 galvanized steel pipe with a pipe diameter of 83 mm for transporting pipes,cyclone separator with cylinder diameter of 500 mm and bag filter dust collectors were selected.The feed conveying capacity,pressure drop in pipes,and breakage rate of the test device were tested.The results showed that the relative error of the conveying capacity of the experimental device was less than 8.33%.With increasing of system pressure drop,the conveying capacity basically increased linearly.In the meanwhile,the average breakage rate of feed was 11.50%.There was no pipe sticking or elbow blockage during the working process.All the parts work normally,the system runs stably and reliably,also the performance indexes meet the design requirements.The research results indicated that the pneumatic conveying of pig feed designed in this experiment could meet the requirements of modern large-scale pig breeding.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.222