弧面对压法检测混凝土抗压强度技术研究  

Research on technology of detecting concrete compressive strength inspection by opposite arc surface compression method

作　　者：韩春雷 王大勇 HAN Chunlei;WANG Dayong(Hebei Concrete Quality Testing Technology Innovation Center,Langfang 065000,China;Langfang Yangguang Construction Quality Test Co.,Ltd.,Langfang 065000,China)

机构地区：[1]河北省混凝土质量检测技术创新中心,廊坊065000 [2]廊坊市阳光建设工程质量检测有限公司,廊坊065000

出　　处：《建筑结构》2022年第3期89-93,共5页Building Structure

摘　　要：针对混凝土抗压强度检测,提出了一种弧面对压法检测技术。在混凝土立方体试块中钻取直径38mm的微小芯样作为弧面对压试件,采用自行研制的弧面对压仪在试件的两个相对弧形侧面施加压力,测得试件破型时弧面对压力值,并计算得到弧面对压试件破型时的应力值。同时测试同批浇筑成型的混凝土标准立方体试块抗压强度值。根据7种不同混凝土强度的203组试验数据,建立了弧面对压试件应力与混凝土抗压强度间的相关关系,依据最小二乘法原理进行回归,拟合得到弧面对压法测强曲线。给出弧面对压法检测技术的试验方法和操作要点。最后,在实体剪力墙结构构件上钻取试件,进行了弧面对压法与钻芯法测试结果对比。结果表明,弧面对压法测强曲线具有较高的精度。弧面对压法检测技术适用于混凝土强度等级C20~C70密集配筋现浇结构构件与装配式结构构件混凝土抗压强度检测。Aiming at the detection of concrete compressive strength, an opposite arc surface compression method detection technology was proposed. A micro core sample with diameter of 38 mm was drilled from concrete cube as the specimen of the opposite arc surface compression, and the self-developed opposite arc surface compression gauge was used to apply pressure on the two opposite arc sides of the specimen. Opposite arc surface compression value was measured when the specimen is broken, and the stress value was obtained by calculation when the specimen of the opposite arc surface compression is broken. Simultaneously, the compressive strength value of the standard cubic block of concrete poured in the same batch was measured. The relationship between the stress value of the arc surface compression specimens and the compressive strength of concrete was established by using 203 sets of experiment data on concretes with 7 different strengths. The opposite arc surface compression strength curve was regressed by the least square method. The test methods and operational guidelines of the opposite arc surface compression method detection technique were given. Finally, the specimens were drilled on the structural member of the solid shear wall, and the test results of the opposite arc surface compression method and the core drilling method were compared. The results show that opposite arc surface compression strength curve has a high accuracy. The opposite arc surface compression method detection technique can be used for the quality inspection of concrete strength C20~C70 of densely reinforced cast-in-place structural elements and prefabricated buildings.

关 键 词：弧面对压法 混凝土抗压强度 测强曲线 检测技术 

分 类 号：TU528.1[建筑科学—建筑技术科学] TU528.31