建筑结构设计中嵌固部位的基本条件及影响因素分析  

Discussion on Basic Requirements and Influencing Factors of Embedded Parts of Building Structures

作　　者：蒋剑峰 JIANG Jian-feng(Architects&Engineers Co.,Ltd of Southeast University,Nanjing Jiangsu 210096 China)

机构地区：[1]东南大学建筑设计研究院有限公司,江苏南京210096

出　　处：《江苏建筑》2021年第6期27-29,共3页Jiangsu Construction

摘　　要：在建筑结构设计中,对于带地下室的结构,将上部结构的嵌固部位选择在地下室顶面,是最经济合理的选择。地下室顶面作为上部结构的嵌固端,需满足刚度比及相关的计算和构造要求。当不满足相关要求时,应根据实际情况,判定上部结构嵌固部位的合理位置,并采取计算和构造措施,保证结构设计的经济、合理、安全、可靠。文章的结论和建议可供相关结构设计参考。In the design of building structure,for the structure with basement,it is the most economical and reasonable choice to select the embedded part of the superstructure on the top of the basement.As the embedded end of the superstructure,the top surface of the basement shall meet the stiffness ratio and relevant calculation and structural requirements.When the relevant requirements are not met,the reasonable position of the embedded part of the superstructure shall be determined according to the actual situation,and calculation and structural measures shall be taken to ensure the economy,rationality,safety and reliability of the structural design.The conclusions and suggestions of this paper can be used as a reference for relevant structural design.

关 键 词：嵌固部位 刚度比 地下室 

分 类 号：TU318[建筑科学—结构工程]