检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王利霞[1,2] 毕肇杰 史淼磊 王晨[1,2] 王东方[1,2] 李倩[2] WANG Lixia;BI Zhaojie;SHI Miaolei;WANG Chen;WANG Dongfang;LI Qian(School of Mechanics and Safety Engineering,Zhengzhou University,Zhengzhou 450001,Henan,China;National International Joint Research Center for Micro-Nano Moulding Technology,Zhengzhou University,Zhengzhou 450001,Henan,China)
机构地区:[1]郑州大学力学与安全工程学院,河南郑州450001 [2]郑州大学微纳成型技术国家级国际联合研究中心,河南郑州450001
出 处:《化工学报》2022年第2期933-940,共8页CIESC Journal
基 金:河南省科技攻关项目(国际科技合作)(172102410061);国家自然科学基金项目(11372287)。
摘 要:超高分子量聚乙烯(UHMWPE)是常用的高性能聚合物。由于高黏度的影响,极大地限制了其加工成型与应用。聚乙二醇(PEG)具有高流动性,被广泛用来改善UHMWPE的流变行为,但复合材料中添加相的分散效果对材料的性能有重要影响。采用干粉混合、溶液混合、熔融挤出共混等方式制备了不同配比UHMWPE/PEG复合材料。基于熔融拉伸实验研究了共混方式及配比对UHMWPE缠结行为及性能的影响。结果表明,PEG的加入降低了复合材料的链缠结密度。三种混合方式中,加入5%PEG时干粉混合与挤出混合解缠作用较明显,链缠结密度均降低26%左右。Ultra-high molecular weight polyethylene(UHMWPE)is a commonly used high-properties polymer.Due to the influence of high viscosity,its processing and application are greatly restricted.The uniformity of the additive dispersion during processing is considered to be the key for the preparation of high-properties UHMWPE composites.Polyethylene glycol(PEG)has high fluidity and is widely used to improve the viscosity behavior of UHMWPE.But the dispersion effect of the added phase in the composite material has an important influence on the performance of the UHMWPE composites.UHMWPE/PEG composites with different proportions were prepared by dry powder mixing,solution mixing,and melt extrusion blending.Based on the melt tensile test,the influence of blending mode and ratio on the entanglement behavior and properties of UHMWPE was studied,and the microscopic mechanism of the disentanglement of UHMWPE molecular chain was analyzed by the presence of PEG.The results show that the addition of PEG increases the plasticity of UHMWPE,reduces its internal chain entanglement density,and increases the mobility between molecular chains.Although the crystallinity of the material is improved to certain extent,it does not significantly change the melting temperature.Among the three mixing methods,when 5% PEG is added,the untangling effect of dry powder mixing and extrusion mixing is more obvious,and the chain entanglement density is reduced by about 26%.
关 键 词:超高分子量聚乙烯 混合 解缠结 力学性能 界面结构
分 类 号:TB332[一般工业技术—材料科学与工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.118.140.120