某轮轨式转台中大型转台骨架的设计与力学分析  

Design and Mechanical Analysis of Large-Scale Turntable Frame in Wheel-Rail Turntable

作　　者：徐德红[1,2] 汤付营 蔡亮亮 寇伟光 XU De-hong;TANG Fu-ying;CAI Liang-liang;KOU Wei-guang(The 39th Research Institute of China Electronics Technology Group Corporation,Xi'an 710065,China;Shaanxi Key Laboratory of Antenna and Control Technology,Xi'an 710065,China;Troop No.63926 of Chinese People’s Liberation Army,Beijing 100192,China)

机构地区：[1]中国电子科技集团第三十九研究所,陕西西安710065 [2]陕西省天线与控制技术重点实验室,陕西西安710065 [3]中国人民解放军63926部队,北京100192

出　　处：《机械工程与自动化》2022年第1期115-116,119,共3页Mechanical Engineering & Automation

摘　　要：设计了某轮轨式转台中的大型转台骨架,转台长34 000 mm、宽33 000 mm、高48 000 mm,主体结构采用桁架式,由钢梁组装而成。采用力学分析软件ANSYS对转台骨架进行了两种工况下的仿真分析,得到的最大变形量为10.30 mm、最大等效应力为126.643 MPa。轮轨式转台重量轻、刚度好、便于运输,可满足天线工作需求。A large-scale turntable skeleton in a wheel-rail turntable is designed.The turntable has a length of 34 000 mm,a width of33 000 mm,and a height of 48 000 mm.The main structure adopts a truss type and is assembled from steel beams.The mechanical analysis software ANSYS was used to simulate and analyze the framework of the turntable under two working conditions,and the maximum deformation was 10.30 mm and the maximum equivalent stress was 126.643 MPa.The wheel-rail turntable has light weight,good rigidity,and is easy to transport,which can meet the needs of antenna work.

关 键 词：轮轨式转台 转台骨架 力学分析 

分 类 号：TP391.7[自动化与计算机技术—计算机应用技术]