检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:蔡鹏程 马希直[1] 原兆祥 CAI Pengcheng;MA Xizhi;YUAN Zhaoxiang(Key Laboratory of Helicopter Transmission Technology,Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China)
机构地区:[1]南京航空航天大学直升机传动技术国防科技重点实验室,江苏南京210016
出 处:《机械制造与自动化》2022年第1期142-145,共4页Machine Building & Automation
摘 要:为实现对径向波箔轴承箔片变形的更准确分析,基于Timoshenko梁单元建立箔片变形模型,在考虑库仑摩擦效应影响的基础上,计算不同载荷下箔片模型的变形,并与文献中的Heshmat公式、Iordanoff公式以及NDOF模型的计算结果进行对比,验证Timoshenko梁模型计算的准确性;改变摩擦系数的大小计算不同情况下的箔片变形,发现摩擦系数越大,箔片变形越小,而且两种摩擦系数的影响基本相同;通过静特性的求解得到了剪切刚度对轴承性能的影响规律。To achieve more accurate analysis of foil deformation of journalbump-type foil bearing,a foil deformation model is established based on Timoshenko beam element.In consideration of the influence of Coulomb friction effect,the deformation of foil model under different loads is calculated,and compared with the Heshmat formula,Iordanoff formula and caculation results of NDOF model,The accuracy of the calculation of the Timoshenko beam model is verified.By changing the friction coefficient to calculate the foil deformation under different conditions,it is found that the larger the friction coefficient,the smaller the foil deformation,and the effect of the two friction coefficients are basically the same.The influence law of shear stiffness on bearing performance is secured by solving static characteristics.
关 键 词:Timoshenko梁单元 库仑摩擦 剪切刚度 箔片变形 波箔轴承
分 类 号:TH117[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.200