体膨颗粒非均质裂缝封堵效果与改善  

Water Plugging Performance and Improvement of Preformed Particle Gel in Heterogenous Fractures

作　　者：孙琳[1] 张永昌 吴轶君 辛军 蒲万芬[1] SUN Lin;ZHANG Yongchang;WU Yijun;XIN Jun;PU Wanfen(State Key Laboratory of Oil and Gas Reservoir Geology and Exploitation,Southwest Petroleum University,Chengdu,Sichuan 610500,China;No.9 Oil Production Plant,Changqing Oilfield Company,PetroChina,Yinchuan,Ningxia 750006,China;Sulige Project Management Department,Chuanqing Drilling Engineering Limited Company,CNPC,Ordos,Inner Mongolia 017300,China;Research Institute of Geological Exploration and Development,Chuanqing Drilling Engineering Company Limited,CNPC,Chengdu,Sichuan 610501,China)

机构地区：[1]油气藏地质及开发工程国家重点实验室·西南石油大学,四川成都610500 [2]中国石油长庆油田分公司第九采油厂,宁夏银川750006 [3]中国石油川庆钻探公司苏里格项目经理部,内蒙古鄂尔多斯017300 [4]中国石油川庆钻探公司地质勘探开发研究院,四川成都610501

出　　处：《西南石油大学学报（自然科学版）》2022年第1期151-157,共7页Journal of Southwest Petroleum University(Science & Technology Edition)

基　　金：国家科技重大专项(2016ZX05053-004-004)。

摘　　要：体膨颗粒已广泛应用于高温高盐裂缝性油藏控水,且其封堵效果与颗粒尺寸、颗粒分流率密切相关。采用人工造缝的碳酸盐岩露头岩芯组模拟非均质裂缝储层,在130℃、19.8×10;mg/L条件下进行体膨颗粒裂缝堵水效果评价与改善实验。结果发现,粒径过大、窄裂缝分流率过高的体膨颗粒可能加剧裂缝产液的非均质性,而粒径过小的体膨颗粒不适用于出水强度较高的储层。将可固化覆膜颗粒与体膨颗粒联用,前者在油藏高温下固化于宽裂缝内形成不可动筛网段塞,令后者从宽裂缝中突破的压力梯度显著高于窄裂缝,进而可有效改善非均质裂缝的产液剖面,并消除因体膨颗粒尺寸、分流率不当对裂缝封堵带来的负面影响。研究有助于进一步认识体膨颗粒的非均质裂缝封堵行为,对提高裂缝油藏的控水效果具有积极意义。Preformed particle gels(PPGs) have been widely used to control water production in high-temperature and high-salinity fractured reservoirs and their plugging effect is closely related to particle size and diversion.In this paper,carbonate outcrop cores with artificial fractures are used to simulate heterogeneous fracture reservoirs,and the water plugging evaluation and improvement experiments are carried out under the condition of 130℃ and 19.8×10;mg/L.The results show that the oversized PPGs or the excessive PPG-diversion in low-permeability fractures may aggravate the heterogeneity of fluid production,while the undersized PPGs are not suitable for the reservoirs with high water production strength.Therefore,we propose combining the curable resin-coated particles(CRPs) with PPGs to improve the water plugging performance.The CRPs form immobile packs in high-permeability fractures at reservoir temperature,which results in the larger breakthrough pressure gradients of the PPGs in high-permeability fractures relative to that of the PPGs in low-permeability fractures.The combined CRPs and PPGs can reverse the liquid-producing profiles of the heterogeneous fractures and eliminate the negative effects of improper PPG size and diversion rate on the water plugging.This study is helpful to further understand the water-plugging behaviors of PPGs in heterogeneous fractures and has positive significance for improving the water control effect in fractured reservoirs.

关 键 词：体膨颗粒 可固化覆膜颗粒 裂缝 堵水 非均质 

分 类 号：TE357[石油与天然气工程—油气田开发工程]