高能电子成像直线加速器控制系统设计  

Design of Control System for the Electron Linac for High Energy Electron Radiography

作　　者：周有为 曹树春[1,2] 赵全堂 申晓康[1,2] 宗阳 冉朝晖[1,2] 张子民 ZHOU You-wei;CAO Shu-chun;ZHAO Quan-tang;SHEN Xiao-kang;ZONG Yang;RAN Zhao-hui;ZHANG Zi-min(Institute of Modern Physics,Chinese Academy of Sciences,Lanzhou 730000,China;School of Nuclear Science and Technology,University of Chinese Academy of Sciences,Beijing 100049,China)

机构地区：[1]中国科学院近代物理研究所,兰州730000 [2]中国科学院大学核科学与技术学院,北京100049

出　　处：《核电子学与探测技术》2021年第3期474-478,共5页Nuclear Electronics & Detection Technology

基　　金：国家自然科学基金(11435015,11505251,11875303);科技部国家重点研究计划(2016YFE0104900);甘肃省青年科技基金计划(18JR3RA379);中国科学院科研仪器设备研制(28Y740010);中国科学院对外合作重点(113462KYSB20160036)资助。

摘　　要：针对近代物理研究所高能电子成像实验和电子直线加速器稳定运行的要求,基于实验物理与工业控制系统(EPICS)设计了一套直线加速器控制系统。首先介绍了控制系统的总体设计,然后较为全面地介绍了各子系统的硬件结构和软件开发,最后介绍了系统远程界面和测试结果。控制系统已经投入运行一年,运行过程中性能可靠稳定,满足电子直线加速器的控制要求。In order to satisfy the requirements of High Energy Electron Radiography(HEER)experimental and stable linac operation at Institute of Modern Physics(IMP),the control system was designed based on EPICS.In this paper,firstly the general design of the control system is introduced,then the hardware and software for all subsystem are described.Finally,the interface and some tests are also presented.The control system is successful under operation for one year,it operate stably and satisfies the control requirement of linac normal operation.

关 键 词：控制系统 高能电子成像 电子直线加速器 实验物理与工业控制系统 

分 类 号：TL503.6[核科学技术—核技术及应用]