数值反应堆堆芯通道级三维热工水力程序CorTAF开发及初步验证  

Development and Preliminary Validation of Three-dimensional Subchannel Thermal-hydraulic Analysis Code CorTAF for Numerical Reactor Core

作　　者：刘凯[1] 王明军 田文喜[1] 秋穗正[1] 苏光辉[1] LIU Kai;WANG Mingjun;TIAN Wenxi;QIU Suizheng;SU Guanghui(School of Nuclear Science and Technology,State Key Laboratory on Power Engineering and Multiphase Flow,Shaanxi Provincial Key Laboratory of Advanced Nuclear Energy Technology,Xi'an Jiaotong University,Xi'an 710049,China)

机构地区：[1]西安交通大学核科学与技术学院,动力工程多相流国家重点实验室,陕西省先进核能技术重点实验室,陕西西安710049

出　　处：《原子能科学技术》2022年第2期261-270,共10页Atomic Energy Science and Technology

摘　　要：堆芯是核动力系统的核心部件,其完整性是反应堆安全运行的重要前提。传统核反应堆堆芯热工水力分析方法无法满足未来先进核动力系统的高精度模拟需求。本文依托开源CFD平台OpenFOAM,针对压水堆堆芯棒束结构特点建立了冷却剂流动换热模型、燃料棒导热模型和耦合换热模型,开发了一套基于有限体积法的压水堆全堆芯通道级热工水力特性分析程序CorTAF。选取GE3×3、Weiss和PNL2×6燃料组件流动换热实验开展模型验证,计算结果与实验数据基本符合,表明该程序适用于棒束燃料组件内冷却剂流动换热特性预测。本工作对压水堆堆芯安全分析工具开发具有参考和借鉴意义。Reactor core is the pivotal component of nuclear power system,and its integrity is an important prerequisite for safe operation of reactor.Traditional nuclear reactor core thermal-hydraulic analysis methods cannot meet the high precision simulation requirements of advanced nuclear power systems in the future.In this paper,based on open source CFD platform OpenFOAM,a coolant flow heat transfer model considering diffusion due to turbulent mixing between adjacent coolant channels and rod bundle structure characteristics of pressurized water reactor(PWR)was established.A fuel rod heat conduction model was built to describe the internal temperature distribution formed by multiple nodes placed along the radial direction of fuel rods,and a coupled heat transfer model were proposed according to the mapping relationship between the external boundary condition of fuel rod heat conduction equation and convective heat transfer energy source term in coolant governing equation.The three-dimensional subchannel thermal-hydraulic characteristics analysis code CorTAF for PWR core based on finite volume method was developed.After that,various fuel assembly flow and heat transfer experiments were selected to carry out model validation.For GE3×3 experiment,the calculated results of coolant velocity distribution in each channel of test section agree well with the experimental data,indicating that the CorTAF code can predict the flow characteristics in the fuel assembly effectively against COBRA code with similar computational accuracy.For Weiss experiment,the calculated results of coolant flow rate distribution in each assembly of test section are in good agreement with the experimental data,which illustrates that the CorTAF code can accurately predict the flow characteristics in parallel open assemblies under inlet partially blocked condition.For PNL2×6 experiment,the calculated results of coolant temperature and velocity distribution along center line of experimental section are basically consistent with the experimental data and

关 键 词：OPENFOAM 压水堆堆芯 耦合换热 子通道分析 

分 类 号：TL334[核科学技术—核技术及应用]