采用“板框过滤工艺”去除木薯酒精废水CSTR厌氧反应器出水悬浮物的研究  

Research on Removal of Suspended Solids from Cassava Alcohol Wastewater through the CSTR Anaerobic Reactor Effluent by “Plate-and-frame Filtration Process”

作　　者：李星华 Li Xinghua(CCCC-FHDI Engineering Co.,Ltd.,Guangzhou 510230,China)

机构地区：[1]中交第四航务工程勘察设计院有限公司,广东广州510230

出　　处：《广东化工》2022年第4期162-164,128,共4页Guangdong Chemical Industry

摘　　要：针对出水CODCr和SS浓度超标等问题,某酒精废水处理站在CSTR高温厌氧反应器出水去除悬浮物的斜筛/气浮/沉淀工艺基础上进行了提标改造试验研究,出水执行《水污染物排放限值》(DB 44/26-2001)。结果表明,通过将"板框过滤工艺"作为CSTR厌氧反应器出水去除悬浮物的工艺,SS从改造前的8~15 g/L下降到改造后的3 g/L以下,保障了进入后续二级厌氧及A/O生化池的稳定运行,最终实现出水水质达标排放。In order to solve the problem of excessive concentration of CODC r and SS in the water, an alcohol wastewater treatment station carried out an experimental study of upgrading and reconstruction on the basis of inclined screen, air floatation and precipitation process of CSTR high-temperature anaerobic reactor effluent to remove suspended solids. The effluent shall be subject to the standard of “Discharge Limits of Water Pollutants(DB 440026-2001)”. The results show that by adopting the “Plate-and-frame Filtration Process” as the process of removing suspended solids through the effluent of CSTR anaerobic reactor, the SS is reduced from 8-15 g/L before modification to 3 g/L after modification, which ensures the stable operation of the subsequent secondary anaerobic and A/O biochemical tank, thus finally achieving the effluent quality up to the discharge standard.

关 键 词：木薯酒精废水 板框过滤 悬浮物 混凝沉淀 厌氧 

分 类 号：X797[环境科学与工程—环境工程]