检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张润灏 杨健 叶格凡 孙晗 杨文魁 ZHANG Runhao;YANG Jian;YE Gefan;SUN Han;YANG Wenkui(State Key Laboratory of Advanced Special Steel,School of Materials Science and Engineering,Shanghai University,Shanghai 200444,China)
机构地区:[1]上海大学材料科学与工程学院省部共建高品质特殊钢冶金与制备国家重点实验室,上海200444
出 处:《炼钢》2022年第1期1-13,共13页Steelmaking
基 金:国家自然科学基金钢铁联合研究基金重点支持项目(U1960202)。
摘 要:转炉脱磷工艺利用了转炉容积大的特点,可以实现转炉前期快速高效低碱度脱磷。脱碳渣的循环利用降低了石灰等辅料消耗和渣量。在低温低碱度转炉脱磷的条件下,低温在热力学上有利于脱磷,但温度过低会使渣过于粘稠而影响动力学条件并使倒渣困难;适当提高碱度,脱磷效果较好。随着渣中氧化铁含量的上升,脱磷效果先上升后下降。转炉脱磷渣中固液两相共存,其中的富磷相固溶体具有很好的富磷作用。双联法由于脱磷后渣钢完全分离,能有效提高脱磷率,适合生产超低磷钢;但由于该工艺需要两个转炉,转炉利用效率低,同时中间出钢热损失大。双渣法转炉脱磷工艺只需要一个转炉,且钢水洁净度高,是转炉脱磷的重要发展方向。The converter dephosphorization process takes the advantages of capacious furnace,which enables the rapid and efficient dephosphorization with low slag basicity in the early stage of converter steelmaking.The recycling of decarburization slag can also reduce the consumption of lime and other auxiliary materials and the amount of slag emission.Under the conditions of low basicity and low temperature,the low temperature is beneficial to dephosphorization in thermodynamics.But too low temperature will result in the high slag viscosity,which affect the kinetic conditions and make it difficult to pour the slag.The dephosphorization effect is better when the basicity is properly increased.With the increase of FeO content in slag,the dephosphorization ratio first increases and then decreases.The solid and liquid phase coexist in the dephosphorization slag,and the solid solution of P-rich phase has good phosphorus enrichment ability.Owing to the complete separation of slag and hot metal after dephosphorization,the duplex process can effectively improve the dephosphorization ratio and is suitable for the production of ultra-low phosphorus steel.However,because the process requires two converters,the utilization efficiency of converter is low and the heat loss of intermediate tapping is large.The double slag process only needs one converter,and the cleanliness of molten steel is high,which is an important development direction of converter dephosphorization.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.221.99.121