基于状态变量x0+Δx分解的配电自动化规划研究  

Research on distribution automation planning based on state variables x_(0)+Δx decomposition

作　　者：聂文海 方逸航 周毅 赵一男 赵敏 李顺昕 NIE Wenhai;FANG Yihang;ZHOU Yi;ZHAO Yinan;ZHAO Min;LI Shunxin(State Grid Jibei Electronic Economic Research Institute,Beijing 100089,China;Department of Electrical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China)

机构地区：[1]国网冀北电力有限公司经济技术研究院,北京100089 [2]上海交通大学电气工程系,上海200240

出　　处：《供用电》2022年第3期25-31,共7页Distribution & Utilization

基　　金：国家重点研发计划资助项目“城市综合能源智慧物联管控技术研究及应用示范”(2020YFB2104500)。

摘　　要：在新型电力系统背景下,不确定因素的广泛接入为配电网可靠性带来了巨大挑战。为更合理地配置配电自动化终端以解决可靠性问题并提升方案的经济性,提出了基于状态变量分解的配电自动化规划模型。首先,根据相关导则和文献研究的总结,初步构建了供电单元网架规划和自动化配置映射集合;其次,以状态变量分解和局部线性化的方式将电网整体规划问题转换为供电单元局部规划问题,并在连续化后以卡罗需-库思-塔克(Karush-Kuhn-Tucker,KKT)条件求解;最后,通过对某地城市配电网的算例研究,分析了不同接线方式下终端配置数及线路分段数对投入产出比的影响,得出了不同情况下的最优配置方案,验证了所述模型的有效性。Under the background of new power system,the wide access of uncertain factors has brought great challenges to the reliability of distribution network.In order to configure distribution automation terminals more reasonably to solve the reliability problem and improve the economy of the scheme,a distribution automation planning model based on state variable decomposition is proposed.Firstly,according to the summary of relevant guidelines and papers,the mapping set of power supply unit grid planning and automatic configuration is constructed;Secondly,the overall power grid planning problem is transformed into local power supply unit planning problems by means of state variable decomposition and local linearization,which is solved under KKT condition after continuation;Finally,through the case study of an urban distribution network,the effects of terminal configuration number and network subsection number on the input-output ratio under different connection modes are analyzed,the optimal configuration schemes under different conditions are obtained,and the effectiveness of the model is verified.

关 键 词：状态变量分解 KKT条件 一二次协同 规划 终端配置 

分 类 号：TM72[电气工程—电力系统及自动化]