玻璃瓶罐表面冷热端喷涂增强优化  

Optimization of Cold and Hot Ends Spraying for Glass Bottle Surface Enhancement

作　　者：崔兴光 王均光[2] 沈建兴[3] 刘建安[3] 刘希亭 CUI Xingguang;WANG Junguang;SHEN jianxing;LIU Jianan;LIU Xiting(Shandong Hongda Glassware Co.,Ltd.,Zibo 255200,China;Shandong Light Industry Design Institute Co.,Ltd.,Jinan 250142,China;Qilu University of Technology(Shandong Academy of Sciences),Jinan 250353,China;Qingdao Belden Xinyuan Industry and Trade Co.,Ltd.,Qingdao 266700,China)

机构地区：[1]山东宏达玻璃制品有限公司,淄博255200 [2]山东省轻工业设计院有限公司,济南250142 [3]齐鲁工业大学(山东省科学院),济南250353 [4]青岛百通新源工贸有限公司,青岛266700

出　　处：《玻璃搪瓷与眼镜》2022年第2期1-8,共8页Glass Enamel & Ophthalmic Optics

基　　金：山东省玻璃绿色制造关键技术研发项目(2018YFJH0402).

摘　　要：玻璃瓶罐是一种绿色环保的食品包装容器,由于玻璃化学组成设计及玻璃熔制、成型、退火和使用等环节中的某些原因,导致玻璃表面存在微观缺陷,从而影响使用。采用扫描电子显微镜分析玻璃瓶罐表面的微观形貌,研究玻璃瓶罐表面喷涂增强的方法,改善使用性能,制定玻璃瓶罐生产过程中的冷热端喷涂技术工艺。研究结果表明,采用新研制的冷端喷涂液喷涂的玻璃瓶的滑动角小于10°。Glass bottle is a kind of green and environmental friendly food packaging container.During the production,maybe there are many microscopic defects on the glass bottle surface caused by glass chemical composition designing,melting,forming,annealing and using,which affect its performance.The microscopic morphology of the glass bottle surface was analyzed by scanning electron microscope.The glass surface spray enhancement was investigated which can effectively improve its performance.The cold and hot end spraying technology were formulated to improve the performance of glass bottle in the production process.Results show that the slide angle of the glass bottle prepared with the designed cold end spraying technology can be less than 10°.

关 键 词：玻璃瓶罐 冷热端喷涂 表面增强 

分 类 号：TQ171.6[化学工程—玻璃工业]