KH-550/SA改性硅灰石及其在顺丁橡胶中的应用  被引量:2

KH-550/Stearic Acid Modified Wollastonite and Its Application in Butadiene Rubber

在线阅读下载全文

作  者:肖毓秀 宋波 朱严瑾 邱小莹 彭鹤松 Xiao Yuxiu;Song Bo;Zhu Yanjin;Qiu Xiaoying;Peng Hesong(Jiangxi Guangyuan Chemical Co.,Ltd.,Ji’an 331500,China;Yunnan Natural Rubber Industry Group Co.,Ltd.,Kunming 650216,China)

机构地区:[1]江西广源化工有限责任公司,江西吉安331500 [2]云南天然橡胶产业集团有限公司,云南昆明650216

出  处:《云南化工》2022年第2期30-32,53,共4页Yunnan Chemical Technology

摘  要:采用硅烷偶联剂KH-550和硬脂酸SA复合的改性剂对硅灰石进行改性处理,并将改性后的硅灰石填充于顺丁橡胶中,研究了硅灰石/顺丁橡胶复合材料的性能。通过对比改性前后硅灰石粉体的活化率、吸油值、界面接触角及红外光谱,确定硅灰石的最佳改性条件为:复合改性剂用量(质量分数)2%,KH-550与SA质量比1∶1,反应温度60℃,改性时间45 min。将改性后的硅灰石添加到顺丁橡胶中,研究表明,当改性硅灰石填充量为40份时,硅灰石/顺丁橡胶复合材料的力学性能最优,其拉伸强度为7.6MPa,扯断伸长率546%,撕裂强度4.7MPa。The wollastonite was modified by silane coupling agent KH-550 and stearic acid,and then the modified wollastonite was filled in butadiene rubber.The properties of the wollastonite/butadiene rubber composites were studied.By comparing the activation rate,oil absorption value,interfacial contact angle and infrared spectrum of wollastonite powder before and after modification,the optimal modification conditions were determined as follows:the amount of composite modifier was 2.5wt%,the mass ratio of KH550 to SA was 1:1,the reaction temperature was 60℃and the modification time was 40mins.The results showed that the mechanical properties of composites were the best with tensile strength of 7.6MPa,elongation at break of 546%and tear strength of 4.7MPa,when the filling amount of modified wollastonite was 40 phr.

关 键 词:硅灰石 顺丁橡胶 表面改性 力学性能 

分 类 号:TD97[矿业工程—选矿] TQ333[化学工程—橡胶工业]

 

参考文献:

正在载入数据...

 

二级参考文献:

正在载入数据...

 

耦合文献:

正在载入数据...

 

引证文献:

正在载入数据...

 

二级引证文献:

正在载入数据...

 

同被引文献:

正在载入数据...

 

相关期刊文献:

正在载入数据...

相关的主题
相关的作者对象
相关的机构对象