一种新型便携定量相位显微镜的研发  

Development of a New Portable Quantitative Phase Microscope

作　　者：陈吉丽 唐礼浩 倪语丹 薄康莹 孟雨涵 徐小青 王利群 CHEN Jili;TANG Lihao;NI Yudan;BO Kangying;MENG Yuhan;XU Xiaoqing;WANG Liqun(Changzhou Vocational Institute of Mechatronic Technology,Changzhou 213164,China)

机构地区：[1]常州机电职业技术学院,江苏常州213164

出　　处：《机械工程师》2022年第3期77-78,81,共3页Mechanical Engineer

基　　金：常州市科技计划项目(CJ20210032);常州机电职业技术学院重大科研项目培养对象(2020ZDXM003)。

摘　　要：为了解决现有显微镜存在的问题,研发了一种新型可便携定量相位显微镜。首先简述了定量相位显微成像系统的设计思路和工作原理;然后利用UG NX 10.0软件对定量相位显微镜进行三维设计;再基于三维打印的方式对其进行加工制造;最后对其进行组装。结果表明,该可便携定量相位显微镜能够成功拍摄出干涉图像,达到相应的预期设计目标。To overcome the technical problems of existing microscope,a new portable quantitative phase microscope is developed.This paper describes the basic principle of quantitative phase microscopic imaging system,then uses UG NX 10.0 software as tool to design three-dimension models of quantitative phase microscope.Based on three-dimension models,the microscope is made using the 3D printing and finally assembled.The results show that this microscope can successfully capture interference images and achieve the corresponding expected goal.

关 键 词：显微镜 干涉图像 三维设计 三维打印 

分 类 号：TH742[机械工程—光学工程]