高强超声处理和强制冷却对Al-5Cu合金组织细化及除气效果的影响  

Effect of High Intensive Ultrasonic and Forced Cooling Treatment on Microstructure Refinement and Degassing of Al-5Cu Alloy

作　　者：喻兵 贾征 韩旭 宋婧怡 刘玉鹏 陈晓东 YU Bing;JIA Zheng;HAN Xu;SONG Jingyi;LIU Yupeng;CHEN Xiaodong(College of Mechanical Engineering,Shenyang University,Shenyang 110044,China)

机构地区：[1]沈阳大学机械工程学院焊接工程系,辽宁沈阳110044

出　　处：《铸造技术》2022年第2期90-94,共5页Foundry Technology

基　　金：辽宁省自然科学基金指导计划项目(2019-ZD-0561);辽宁省教育厅重点资助项目(LJKZ1171)。

摘　　要：研究了高强超声联合铸锭底部强冷处理对Al-5Cu合金凝固组织的影响,并采用密度法研究了除气效果。结果表明,超声联合铸锭底部强制冷却处理具有良好的细化和除气效果,当2000 W×120 s时细化效果最佳;铸锭断面几乎为100%等轴晶且内部组织致密、无气孔,此时铸锭密度为2.7911×10^(3)kg·m^(-3),除气率为95.1%。最后对其细化及除气的机理进行了分析。The effect of strong cooling treatment at the bottom of ingot and high intensity ultrasonic on the solidification microstructure of Al-5Cu alloy was studied,and the degassing effect was studied by density method.The results show that ultrasonic and forced cooling treatment at the bottom of ingot has good refining and degassing effect,and the refining effect is the best at 2000 W×120 s.The cross section of the ingot is almost 100%equiaxed grains and the internal structure is dense without pores.At this time,the ingot density is 2.7911×10^(3)kg·m^(-3) and the degassing rate is 95.1%.At last,the mechanism of refinement and degassing were analyzed.

关 键 词：超声处理 Al-5Cu合金 密度 除气率 空化效应 

分 类 号：TG146.2[一般工业技术—材料科学与工程]