双电源自动转换开关自动磨合台研制  

Development of Automatic Running-In Platform for Double Power Automatic Transfer Switch

作　　者：肖安建 陈佳成 金美玲 XIAO An-jian;CHEN Jia-cheng;JIN Mei-ling(School of Mechanical Engineering and Automation,Zhejiang Sci-Tech University,Hangzhou 310018,China;Hangshen Group Hangzhou Zhijiang Switchgear Co.,Ltd,Hangzhou 311234,China)

机构地区：[1]浙江理工大学机械与自动控制学院,浙江杭州310018 [2]杭申集团杭州之江开关股份有限公司,浙江杭州311234

出　　处：《电工电气》2022年第3期50-55,共6页Electrotechnics Electric

摘　　要：针对传统自动转换开关(ATSE)磨合台装夹慢、磨合效率低,并经常发生磨合中断等问题,设计出三种能够有效解决问题的自动磨合台。给出了设计方案和基本结构,并对三种自动磨合台进行多角度对比与分析,确立了夹叉式气动磨合台为最终方案,经试验验证和实际生产应用表明,夹叉式气动磨合台经车间使用效果良好,磨合平稳、装夹方便,气动磨合效率显著提高。The traditional automatic transfer switch(ATSE)running-in the platform has problems,such as slow clamping,low running-in efficiency,frequent running-in interruption,etc.This paper designed three different types of the automatic running-in platform which can effectively solve these problems.This study gave a design scheme and a basic structure of the automatic running-in platform.It conducted a multi-angle comparison and analysis of three automatic running-in platforms and established the clamp-type automatic running-in platform as the final scheme.The experimental verification and actual production application show that the fork-type pneumatic running-in platform has a good use effect in the workshop.The new automatic running-in platform has many advantages.For example,the running-in is stable,the clamping is convenient,and the running-in efficiency has been significantly improved.

关 键 词：自动转换开关 自动磨合台 夹叉式气动磨合台 

分 类 号：TM564.8[电气工程—电器]