基于MOPSO的石墨烯/磁性粒子混合填充多层吸波材料优化设计  

Multi-objective optimization of absorbing materials filled with graphene and magnetic particles based on MOPSO

作　　者：赵雨辰[1] 郑家欢 刘江凡[1] 宋忠国[1] 席晓莉[1] ZHAO Yuchen;ZHENG Jiahuan;LIU Jiangfan;SONG Zhongguo;XI Xiaoli(Faculty of Automation and Information Engineering,Xi’an University of Technology,Xi’an 710048,China)

机构地区：[1]西安理工大学自动化与信息工程学院,陕西西安710048

出　　处：《西安理工大学学报》2021年第4期550-554,共5页Journal of Xi'an University of Technology

基　　金：国家自然科学基金资助项目(61971346);西安理工大学科研基金资助项目(103-451319009,103-451420002)。

摘　　要：本文研究了基于多目标粒子群算法(MOPSO)的石墨烯/磁性粒子混合填充多层吸波材料的优化设计。首先,基于电磁场理论推导了多层吸波材料的反射系数,并定义了兼顾宽频带、宽角度和极化无关特性的吸波性能以及磁性粒子填充量这两个相互矛盾的子目标的表达式。进而,以石墨烯纳米片(GNS)/片状羰基铁颗粒(FCI)混合填充吸波材料为例,通过MOPSO优化得到了五层吸波材料模型的最优设计。结果显示,基于MOPSO的多目标优化可以在相互矛盾的子目标之间取得较好的平衡,经过优化的多层吸波材料厚度仅为1.65 mm,总体磁性粒子填充量仅为13.3 wt%,但却可以在大约6~18 GHz的频率范围内和0°~45°的入射角范围内实现至少5 dB反射率衰减,且与入射波极化无关。The multi-objective design of graphene/magnetic particle hybrid-filled multi-layer microwave absorbing materials is investigated by utilizing the multi-objective particle swarm optimization(MOPSO).Firstly,the reflection coefficient for multi-layer absorbing materials is derived from the electromagnetic field theory.Meanwhile,two sub-objectives expressions are defined to represent the wide-band,wide-angle and polarization-independent absorbing capacity and the filling amount of magnetic particles.Then,the optimal design is carried out for a five-layer graphene nanosheet(GNS)/flake carbonyl iron particles(FCI)hybrid-filled absorbing material model.The results show that the multi-objective optimization process based on MOPSO can achieve a good balance between two conflicting sub-targets.Specifically,the optimized multi-layer GNS/FCI absorbing material can achieve at least 5dB polarization-independent reflectivity attenuation in the 6~18 GHz frequency range and the 0°~45°incidence angle range with only 1.65 mm thickness and 13.3 wt%FCI filling amount.

关 键 词：多层吸波材料 石墨烯 磁性粒子 MOPSO 多目标优化 

分 类 号：TN973.23[电子电信—信号与信息处理]