检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:车明光[1] 王萌 王永辉[1] 宋毅[2] 何封 董凯 阮峰 CHE Mingguang;WANG Meng;WANG Yonghui;SONG Yi;HE Feng;DONG Kai;RUAN Feng(Fracturing & Acidizing Technology Center,PetroChina Research Institute of Exploration and Development,Beijing 100083,China;Shale Gas Research Institute,PetroChina Southwest Oil and Gas Company,Chengdu,Sichuan 610014,China;Engineering Department,PetroChina Chuanqing Drilling Engineering Company Limited,Chengdu,Sichuan 610014,China;Shale Gas Project Department,PetroChina Great Wall Drilling Engineering Company Limited,Beijing 100101,China)
机构地区:[1]中国石油勘探开发研究院压裂酸化技术中心,北京100083 [2]中国石油西南油气田分公司页岩气研究院,四川成都610014 [3]中国石油川庆钻探工程有限公司工程技术部,四川成都610014 [4]中国石油长城钻探工程有限公司页岩气项目部,北京100101
出 处:《西安石油大学学报(自然科学版)》2022年第2期53-58,共6页Journal of Xi’an Shiyou University(Natural Science Edition)
基 金:中国石油天然气股份有限公司重大专项“深层页岩气有效开采关键技术攻关与试验:深层页岩气体积压裂技术现场试验”(2019F-31-04)。
摘 要:使用Petrel软件建立了威远20XHXX平台的三维地质模型,优化了页岩气水平井分段压裂参数。研究表明不同的压裂段长与射孔簇数有合理的匹配关系,而且存在最优的用液强度和加砂强度,随着压裂段长、射孔簇数的增加,需要合理调减水平井间距。针对威远页岩气水平井压裂,建议增加射孔簇数缩小簇间距,提高施工排量,不同压裂段长时采用优化的用液强度和加砂强度值。The three-dimensional geological model of Weiyuan 20XHXX platform is established by using Petrel software,and the segmented fracturing parameters of shale gas horizontal wells are optimized.It is shown that there is a reasonable matching relationship between fracturing section length and perforation cluster number,and there is an optimal fracturing fluid flow-rate and proppant concentration.With the increase of fracturing section length and perforation cluster number,it is necessary to reasonably reduce the horizontal well spacing.For the fracturing of Weiyuan shale gas horizontal wells,it is suggested to increase the number of perforation clusters,reduce the cluster spacing,improve the construction displacement,and adopt the corresponding optimized fracturing fluid flow-rate and proppant concentration for different fracturing section length.
关 键 词:页岩气水平井压裂 压裂段长 射孔簇数 水平井间距
分 类 号:TE319[石油与天然气工程—油气田开发工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.117