检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:梁俊伟 罗向龙[1] 杨智 梁颖宗 陈健勇[1] 陈颖 Liang Jun-wei;Luo Xiang-long;Yang Zhi;Liang Ying-zong;Chen Jian-yong;Chen Ying(School of Materials and Energy,Guangdong University of Technology,Guangzhou 510006,China)
机构地区:[1]广东工业大学材料与能源学院,广东广州510006
出 处:《广东工业大学学报》2022年第2期91-98,共8页Journal of Guangdong University of Technology
基 金:国家自然科学基金资助项目(51876043,51736005)。
摘 要:混合工质在相变过程存在温度滑移现象,能与冷热源更好地匹配从而提高有机朗肯循环(Organic Rankine Cycle,ORC)性能,成为ORC工质研究热点。混合工质组合和数量巨大,常规方法用于混合工质筛选及与系统参数的同步优化难度较大。建立了基于Perturbed-Chain Statistical Associating Fluid Theory(PC-SAFT)状态方程计算物性的混合工质三级筛选与ORC系统同步优化模型,基于机器学习极端梯度提升预测气液平衡初值模型,采用遗传算法实现工质筛选与系统参数的同步优化。从26种常用工质组成的纯工质库组合混合工质,根据温度滑移、压力初筛合适的混合工质,有效减少搜索范围。通过混合工质筛选与ORC系统参数同步优化,以净功和㶲效率为目标得到的工质分别为R12/perfluoro-pentane和R40/R160。分析对比了不同热源进口温度下不同目标时工质组合与ORC运行参数优化结果。Temperature slip exists in the phase transition process of the mixtures,which can better match the cold and heat sources,so as to improve the performance of organic Rankine cycle(ORC).Due to the large number and combination of mixtures,it is difficult to use conventional methods to select mixtures and optimize them synchronously with system parameters.A synchronous optimization model of three-stage screening and ORC system of mixtures based on the calculated physical properties of Perturbed-Chain Statistical Associating Fluid Theory(PC-SAFT)was established.The initial value model of gas-liquid equilibrium was predicted based on eXreme Gradient Boosting of machine learning.Genetic algorithm was used to realize the synchronous optimization of working fluid screening and system parameters.From the pure working fluid pool composed of 26 kinds of common working fluids,the suitable mixtures were selected according to the temperature slip and pressure,which effectively reduced the search range.The mixtures R12/Perfluoro-pentane and R40/R160 were obtained for net work and exergy efficiency,respectively.The optimization results of working fluid combination and ORC operation parameters under different heat source inlet temperatures and different targets were compared.
分 类 号:TK212[动力工程及工程热物理—动力机械及工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.63