检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:仝霄金[1] 丁刚 魏汝明[1] 陈训龙[3] TONG Xiaojin;DING Gang;WEI Ruming;CHEN Xunlong(Ji'nan Geotechnical Investigation and Surveying Research Institute, Ji'nan 250000, Shandong, China;Shandong Luqiao Group Co., Ltd., Ji'nan 250100, Shandong, China;Institute of Geotechnical and Underground Engineering, Huazhong University of Science and Technology, Wuhan 430074, Hubei, China)
机构地区:[1]济南市勘察测绘研究院,山东济南250000 [2]山东省路桥集团有限公司,山东济南250100 [3]华中科技大学岩土与地下工程研究所,湖北武汉430074
出 处:《地震工程学报》2022年第2期258-263,共6页China Earthquake Engineering Journal
摘 要:为了能考虑地震双向性和岩土体参数多种不确定性,提出了地震荷载下崩塌堆积体稳定可靠性分析方法,进一步研究水平和竖向地震荷载对崩塌堆积体的可靠性影响。运用极限平衡法和拟静力法分析了双向地震下崩塌堆积体的安全稳定性,采用响应面法和JC法建立崩塌堆积体的地震极限状态方程,然后,运用盲数理论对岩土体参数进行盲数化处理,进一步推导出崩塌堆积体地震安全系数的盲数模型,最后,通过MATLAB编写相应的程序实现计算和分析结果的快速输出。分析表明:该方法计算结果更低,更偏于工程安全可靠;与水平地震荷载相比,竖向地震荷载对崩塌堆积体的稳定可靠性影响很小,仅使得安全系数和可靠度分别降低1.78%和2.78%,因此,在此种工况下,采用拟静力法进行抗震分析时可仅考虑水平地震荷载的影响。A reliability analysis method for the seismic stability of collapse accumulation body,which both considers the bi-directional earthquake excitation and the uncertainty of rock and soil parameters,was proposed in this paper.The influence of horizontal and vertical seismic loads on the stability and reliability of collapse accumulation body was further analyzed.First,the safety and stability state of the collapse accumulation body under bidirectional earthquake was analyzed by using the pseudo static method and the limit equilibrium method,and the seismic limit state equation of collapse accumulation body was established based on the response surface method and the JC method.Then,the parameters of rock and soil were processed using the blind number theory,and the blind number model for the seismic safety factor of collapse accumulation body was further established.Finally,the corresponding program was compiled by MATLAB to realize the fast output of calculation and analysis results.The calculated results showed that:the calculation value of the proposed method is low,so it is more safe and reliable for projects.Compared with the horizontal seismic load,the vertical seismic load has little impact on the stability and reliability of collapse accumulation body,which only reduces the safety factor and reliability by 1.78%and 2.78%,respectively.Therefore,in this case,only the influence of horizontal seismic load needs to be considered when the quasi-static method is used for seismic analysis.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:13.58.157.160