GFRP旋转超声套孔加工轴向力试验研究  

Experimental research on the axial force in rotary ultrasonic trepanning drilling of GFRP

作　　者：朱卓志 郑雷[1] 徐苏柏 董香龙 韦文东 刘子文 宋春阳 ZHU Zhuozhi;ZHENG Lei;XU Subai;DONG Xianglong;WEI Wendong;LIU Ziwen;SONG Chunyang(School of Mechanical Engineering,Yancheng Institute of Technology,Yancheng 224051,CHN)

机构地区：[1]盐城工学院机械工程学院,江苏盐城224051

出　　处：《制造技术与机床》2022年第4期63-68,共6页Manufacturing Technology & Machine Tool

基　　金：江苏省自然科学基金资助项目(BK20201474);国家自然科学基金资助项目(51575470);江苏省研究生科研与实践创新计划项目(SJCX20_1350,SJCX21_XZ002)。

摘　　要：轴向力是反映孔加工过程和状态的最重要参数之一,对纤维增强复合材料的制孔质量有直接影响。为分析旋转超声套孔加工中轴向力随工艺参数的变化规律,基于旋转超声套孔加工中磨粒的运动学特性,建立钻削力数学预测模型,并对玻璃纤维增强复合材料进行孔加工试验研究。试验结果表明:轴向力随着主轴转速提升或进给速度降低呈现减小趋势,与钻削力数学模型预测结果相符;相较于常规套孔加工,旋转超声加工的轴向力降低了6%~25%,孔出口分层因子降低了8%~15%,制孔质量得到有效提升。As one of the most important parameters reflecting drilling process and state,axial force has a direct impact on the quality of fiber reinforced plastic drilling.In order to analyze the variation regulations of axial force with process parameters in rotary ultrasonic trepanning drilling,the mathematical model of drilling force was established based on the kinematic characteristics of single abrasive,and the drilling experiment on glass fiber reinforced plastic was made.The results show that the axial force increases with the increase of spindle speed or decreases with the decrease of feed rate,and the variation trend is consistent with mathematical prediction model.Compared with conventional drilling,in rotary ultrasonic drilling process,the axial force and exit delamination factor decrease by 6%~25%and 8%~15%,and the hole quality has effectively improve.

关 键 词：旋转超声加工 套料钻 GFRP 轴向力 

分 类 号：TB332[一般工业技术—材料科学与工程] TG506[金属学及工艺—金属切削加工及机床]