检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:康家鑫 王修善 谢方平[1,2] 罗曜 李奇 陈志刚[1] Kang Jiaxin;Wang Xiushan;Xie Fangping;Luo Yao;Li Qi;Chen Zhigang(Department of Mechanical and Electrical Engineering,Hunan Agricultural University,Changsha 410128,China;Hunan Key Laboratory of Intelligent Agricultural Machinery Equipment,Changsha 410128,China;Hunan Nongyou Machinery Corporation,Loudi 417700,China)
机构地区:[1]湖南农业大学机电工程学院,长沙410128 [2]智能农机装备湖南省重点实验室,长沙410128 [3]湖南省农友机械集团有限公司,娄底417700
出 处:《农业工程学报》2022年第2期11-22,共12页Transactions of the Chinese Society of Agricultural Engineering
基 金:湖南省高新技术产业引领计划项目(2020NK2002);湖南省旱粮产业技术体系。
摘 要:针对传统大豆联合收获机脱粒间隙调整方法单一、田间作业时工作参数与作物适应性差,导致大豆破碎率、未脱净率和夹带损失率较高的问题,该研究设计了一种对称可调式凹板筛,实现双侧脱粒间隙可调,并对其间隙调整量进行了确定。以大豆联合收获机的前进速度、滚筒转速、脱粒段脱粒间隙、分离段脱粒间隙为影响因素,以大豆破碎率、未脱净率和夹带损失率为评价指标进行四因素三水平响应面试验,利用Desigen-Expert12.0对田间试验结果进行响应面分析,研究不同影响因素对评价指标的影响规律。结果表明,在前进速度为3.3 km/h、前滚筒转速为500 r/min、后滚筒转速为650r/min、脱粒段脱粒间隙19mm和分离段脱粒间隙15mm的参数组合下,采用对称可调式凹板筛的破碎率为2.69%,未脱净率为0.57%,夹带损失率为0.13%,相较于现有的竖直调节式凹板筛,破碎率、未脱净率和夹带损失率分别降低了0.46%、0.71%、0.55%,对称可调式凹板筛的各项指标均优于现有的竖直调节式凹板筛。研究结果可为南方地区大豆联合收获机差速脱粒分离装置的调节以及自适应调节系统的研究提供参考。Threshing has been one of the most fundamental steps to separate the grains from the harvested crop.An adjustment device of threshing clearance can greatly contribute to matching the feeding amount and working parameters in a combine harvester,in order to reduce the damage or loss rate of clean grain in the field.Two parameters are often used to adjust the threshing clearance at present,including the diameter of the cylinder and the position of the concave.In terms of cylinder diameter,there is a relatively larger structure of the device to control the expansion and contraction of the threshing teeth,leading to high power consumption and production cost.Therefore,the vertical adjusting concave has been commonly used to adjust the position of the concave in the combine so far.However,the vertical concave body can normally move up and down to result in the limited threshing clearance at the bottom of the threshing cylinder in the device.In this study,a symmetrically adjustable concave screen was designed to adjust the threshing clearance at the bottom of the cylinder in both sides.Among them,a hinged shaft was welded between the concave body and the upper cover plate that was installed on the frame,and an electric cylinder was positioned on the screen body.Specifically,a mobile phone in Bluetooth mode was utilized to extend or contract the electric cylinder during operation,further to drive the concave body for the rotation around the articulated shaft,and finally to quickly adjust the threshing clearance at the bottom in both sides of the threshing cylinder.A circular curve function was also selected to calculate the cross-sectional area of threshing clearance for the two concaves in the rectangular coordinate system before and after adjusting the threshing clearance.After that,a comparison was made to determine the working performance of the new symmetrically adjustable concave and vertical one on threshing clearance.The results showed that the symmetrically adjustable concave body was realized to bilaterally adj
关 键 词:设计 试验 大豆 联合收获机 脱粒分离装置 脱粒间隙
分 类 号:S225.6[农业科学—农业机械化工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.179