一种S波段E类GaN HEMT功率放大器设计  

Design of a S-Band Class-E GaN HEMT Power Amplifier

作　　者：王德勇 张盼盼 张金灿 刘敏 刘博 孙立功 WANG Deyong;ZHANG Panpan;ZHANG Jincan;LIU Min;LIU Bo;SUN Ligong(School of Electrical Engineering,Henan University of Science and Technology,Luoyang,Henan 471023,P.R.China)

机构地区：[1]河南科技大学电气工程学院,河南洛阳471023

出　　处：《微电子学》2022年第1期28-32,37,共6页Microelectronics

基　　金：国家自然科学基金资助项目(61804046,61704049);河南省科技攻关项目(222102210172,222102210207)。

摘　　要：并联电路E类功率放大器(PA)具有结构简单和高效的优点,因而被广泛应用。针对并联电路E类PA存在带宽较窄、效率较低的问题,对其输出匹配网络提出了一种改进方案。采用混合式π型结构作为PA的输出匹配网络,在较宽的工作带宽内完成了最佳阻抗与标准阻抗的转换,有效地抑制了二次谐波分量,提高了电路的效率。为了验证所提出理论的有效性,基于0.25μm GaN HEMT工艺设计了一种结构简单、高效率和高功率的单片集成E类功率放大器。版图后仿真结果表明,在2.5~3.7 GHz工作频率范围内,输出功率大于40 dBm,功率附加效率为51.8%~63.1%。版图尺寸为2.4 mm×2.9 mm。Since the parallel-circuit class-E power amplifier(PA) has the advantages of simple structure and high efficiency, it has been widely used in many applications. To solve the problem of narrow bandwidth and low efficiency of the parallel-circuit class-E PA, an improved technology for its output matching network was proposed in this paper. A hybrid π-type structure was used as the output matching network of the PA, which not only performed the conversion between the best impedance and the standard impedance within a wide working bandwidth, but also effectively suppressed the second harmonic component, in turn to improve the circuit’s efficiency. In order to verify the validity of the proposed theory, based on a 0.25 μm GaN HEMT process, a monolithic-integrated class-E power amplifier with simple structure, high efficiency and high power was designed in this paper. The post-layout simulation results showed that the output power was greater than 40 dBm, and the power-added efficiency was 51.8% to 63.1% in the 2.5~3.7 GHz operating frequency range. The size of layout was 2.4 mm×2.9 mm.

关 键 词：宽带匹配网络 E类 高效率 功率放大器 

分 类 号：TN722.75[电子电信—电路与系统]