修光刀片与切削刀片配比研究  

Research on the Proportion of Polishing Blade and Cutting Blade

作　　者：付宇鹏 张碧妮 雷学林[3] 张航[3] Fu Yupeng;Zhang Bini;Lei Xuelin;Zhang Hang(Zhuzhou Diamond Cutting Tools Co.,Ltd.,Zhuzhou,Hunan 412000,China;不详;East China University of Science and Technology,Shanghai 200237,China)

机构地区：[1]株洲钻石切削刀具股份有限公司,湖南省株洲市412000 [2]大连外国语学院 [3]华东理工大学,上海市200237

出　　处：《工具技术》2022年第3期89-91,共3页Tool Engineering

摘　　要：本文通过分析修光刀片与切削刀片的作用,对修光刀片的修光刃长进行优化设计和改进。研究发现,降低每齿进给量及减少刀片数可解决刀片的非正常磨损,结合理论与实验发现,当精加工刀具修光刃刀片和切削刀片的配比为1:5时,刀具切削效果最佳。In this paper,by analyzing and introducing the function of the polishing blade and cutting blade,the polishing blade length is optimized.The study finds that reducing the feed per tooth and the number of blades can solve the abnormal wear of the blade.Based on the combination of theoretical experience and experiments,it is found that when the ratio of polishing blade and cutting blade is 1:5,the cutting effect of the tool is the best.

关 键 词：修光刀片 切削刀片 进给量 配比 

分 类 号：TG115[金属学及工艺—物理冶金] TG61[金属学及工艺—金属学]