不同基属减压渣油分输分炼实现重油加工优化  

Different base vacuum residue transport and refine independently foroptimization processing of heavy oil

作　　者：赵志飞 刘宗余 王德良 Zhao Zhifei;Liu Zongyu;Wang Deliang(PetroChina North China Petrochemical Company,Renqiu,Hebei 062552)

机构地区：[1]中国石油华北石化分公司,河北省任丘市062552

出　　处：《炼油技术与工程》2022年第3期1-5,共5页Petroleum Refinery Engineering

摘　　要：利用常减压和渣油加氢双系列工艺,对不同基属减压渣油(减渣)分输分炼、独立加工,提高高硫中间基减渣的掺渣比和脱残炭率,改善催化裂化原料性质;同时降低低硫石蜡基减渣的反应苛刻度,以减少氢耗、实现长周期运行。实践表明,通过分输分炼,高硫中间基减渣掺渣比由65%提高到72%,脱残炭率提高了14百分点,催化裂化原料性质得到了极大改善;低硫高残炭加氢渣油用于生产低硫船用燃料油,提高了经济效益。经测算,分输分炼加工效益比混合加工提升了10.5元/t,并可为催化裂解提供氢质量分数大于13%的优质原料。Two series processes of atmospheric and vacuum distillation and residue hydrogenation are used to separate,transport,refine and process the residue of different base groups,so as to improve the rate of blended residue and decarbonization of high-sulfur intermediate residue,improve the FCC feed.At the same time,reduce the reaction severity of low-sulfur paraffin-based vacuum residue to reduce hydrogen consumption and realize long-term operation.The practice shows that through refining independently,the slag blending rate of high sulfur intermediate vacuum residue is increased from 65%to 72%,the carbon removal rate is increased by 14 percentage points,and the properties of catalytic raw materials are greatly improved.Hydrogenated residual oil with low sulfur and high residual carbon can be used to produce low sulfur ship fuel,improves economic benefits of refinery.The calculation shows that the processing benefit of separate transportation and separate refining is 10.5 yuan/ton higher than that of mixing,and high-quality feedstocks with hydrogen content greater than 13%can be provided for deep catalytic cracking.

关 键 词：减压渣油 分输分炼 重油加工 渣油加氢 低硫船用燃料油 催化裂解原料 

分 类 号：TE624[石油与天然气工程—油气加工工程]