基于IE方法的电梯限速器生产线打印工作站的改善研究  

Improvement of the printing workstation of elevator speed limiter production line based on IE method

作　　者：干旻旭 卢翔倩 程晓 Gan Minxu;Lu Xiangqian;Cheng Xiao(Kangli Elevator Co.Ltd.,Suzhou 215000,China;Australian National University,Canberra 2600,Australia;Applied Technology College,Soochow University,Suzhou 215000,China)

机构地区：[1]康力电梯股份有限公司,江苏苏州215000 [2]澳大利亚国立大学,澳大利亚堪培拉2600 [3]苏州大学应用技术学院,江苏苏州215000

出　　处：《江苏科技信息》2022年第6期36-38,共3页Jiangsu Science and Technology Information

摘　　要：针对电梯限速器生产线打印工作站的作业不规范、时间不合理的问题,文章提出采用模特排时法和KLM-GOMS方法进行分析,并通过ECRS原则对该工位不合理的动作进行改善,改善后发现打印操作时间由原来的83.991 s缩减为4.7 s,极大地节省了作业时间,提高了作业效率。In view of the non-standard operation and unreasonable time of the printing workstation of the elevator governor production line,this paper puts forward the model scheduling method and KLM-GOMS method for analysis,and improves the unreasonable action of the workstation through the ECRS principle.After improvement,it is found that the printing operation time is reduced from the original 83.991 to 4.7 s,which greatly saves the operation time and improves the operation efficiency.

关 键 词：限速器 模特排时法 KLM-GOMS方法 ECRS原则 

分 类 号：TH186[机械工程—机械制造及自动化]