带可调导叶的双向潜水贯流泵装置水力性能  

Hydraulic performance of the bidirectional submersible tubular pump with adjustable guide vanes

作　　者：孙壮壮 于杰 葛恒君 袁海霞 汤方平[1] Sun Zhuangzhuang;Yu Jie;Ge Hengjun;Yuan Haixia;Tang Fangping(College of Hydraulic Science and Engineering,Yangzhou University,Yangzhou 225100,China;Yangzhou Survey and Design Research Institute Co.,Ltd.,Yangzhou 225100,China)

机构地区：[1]扬州大学水利科学与工程学院,扬州225100 [2]扬州市勘测设计研究院有限公司,扬州225100

出　　处：《农业工程学报》2022年第4期42-50,共9页Transactions of the Chinese Society of Agricultural Engineering

基　　金：江苏高校优势学科建设项目(PAPD);江苏省水利科技项目(2021012);扬州市科技计划项目(YZ2018103)。

摘　　要：为提高双向潜水贯流泵装置正反向运行时的水力性能,该研究提出在叶轮前后布置可调导叶,并通过模型试验和数值模拟的方法研究其水力性能,对比灯泡前置和灯泡后置性能差异。研究结果表明:采用可调导叶的双向潜水贯流泵装置兼顾正、反向性能,灯泡前置和后置最优导叶角度分别为12°和20°,最高效率分别为67.9%和66.5%,最高效率点流量约为0.285和0.265 m^(3)/s,灯泡前置时装置效率更高。通过导叶调节,灯泡前置式效率提高约7个百分点,灯泡后置效率提高约6个百分点。就叶轮性能而言,灯泡后置式的叶轮扬程和效率要高于前置式,在灯泡前置和后置最高效率点附近叶轮扬程和效率相差较小,装置性能差异主要由过流部件损失造成。灯泡前置的最小损失小于灯泡后置,灯泡前置式在大流量时损失小于灯泡后置式,在小流量时则要大于灯泡后置式,使得灯泡前置式高效区向大流量偏移。与目前采用常规导叶的双向贯流泵相比,可调导叶可明显提高反向运行时的水力效率,对双向泵站的建设具有较大的工程意义。Pumping stations have been highly required for the bidirectional pumping functions to meet the needs of urban flood control and water diversion.Particularly,droughts and floods alternate frequently in some cities along rivers and lakes in recent years.Since the two-way tubular pump device can obtain high efficiency in the forward operation,the performance can deteriorate seriously in the reverse operation.This study aims to improve the hydraulic efficiency of the bidirectional submersible tubular pump in the forward and reverse operation.The adjustable guide vanes were proposed to arrange before and after the impeller.Two flat plates were composed of the adjustable guide vane,where the angle of the guide vane was timely adjusted,according to the running direction.The influence of the front guide vane on the flow state of the influent was reduced to improve the circulation recovery capacity of the rear guide vane.A model pump device was fabricated to clarify the effects of adjustable guide vane angle and bulb position on the hydraulic performance of the device.The model test results show that the bidirectional submersible tubular pump with the adjustable guide vanes for both forward and reverse performance,the optimal guide vane angles for the bulb front-and rear-mounted were 12°and 20°,respectively,indicating the highest efficiencies of 67.9%and 66.5%,respectively.The highest efficiencies point flow were about 0.285 and 0.265 m^(3)/s,respectively,where the device efficiency was higher when the bulb was in the front.The efficiency of the bulb front-and rear-mounted type increased by about 7 percentage points and 6 percentage points,respectively,indicating the increase in the efficiency of the bulb type by adjusting the guide vane.In terms of impeller performance,the impeller head and efficiency of the rear-mounted type were higher than those of the bulb front-mounted type.There were small differences between the impeller head and efficiency near the highest efficiency point between the bulb front-and rear-mounte

关 键 词：水力机械 模型 试验 双向潜水贯流泵装置 可调导叶 

分 类 号：TH311[机械工程—机械制造及自动化]