基于CP-15-A4传感器的远程大气颗粒检测系统设计  

Design of Remote Atmospheric Particle Detection System Based on CP-15-A4 Sensor

作　　者：王炳祥 李先锋[1] 陈中[2] WANG Bingxiang;LI Xianfeng;CHEN Zhong(School of Information Engineering,Yancheng Institute of Technology,Yancheng Jiangsu 224051,China;School of Electrical Engineering,Yancheng Institute of Technology,Yancheng Jiangsu 224051,China)

机构地区：[1]盐城工学院信息工程学院,江苏盐城224051 [2]盐城工学院电气工程学院,江苏盐城224051

出　　处：《盐城工学院学报（自然科学版）》2022年第1期30-34,共5页Journal of Yancheng Institute of Technology:Natural Science Edition

基　　金：国家级大学生创新创业项目(202110305023Z)。

摘　　要：为远程监测空气中大气颗粒浓度,针对大气颗粒传感器特点,选择CP-15-A4传感器检测大气颗粒浓度,以无线模块为传播媒介发送和接收数据包,选择MSP430系列单片机中的MSP430f169为主控芯片,通过硬件设计、软件编程和分部调试,设计一套远程监测大气颗粒浓度的系统,实现对空气环境中多种大气颗粒的远程检测。最后根据系统的工作原理试制产品,验证了该监测系统的有效性。In order to remotely monitor the concentration of atmospheric particles in the air,according to the characteristics of atmospheric particle sensor,CP-15-A4 sensor is selected to detect the concentration of atmospheric particles.The wireless module is used as the media to send and receive data packets,and MSP430f169 in MSP430 series MCU is selected as the main control chip.Through hardware design,software programming and divisional debugging,a set of remote monitoring system for atmospheric particle concentration is designed to realize the remote detection of various atmospheric particles in the air environment.Finally,according to the working principle of the system,the product is trial-produced to verify the effectiveness of the monitoring system.

关 键 词：微处理器 逻辑判断 环境监测 SPI通信 

分 类 号：TM341[电气工程—电机]