一种C波段一分八微带功分器的设计  

Design of C-band Eight-way Microstrip Divider

作　　者：马瑞 Ma Rui(CRSC Research&Design Institute Group Co.,Ltd.,Beijing 100070,China)

机构地区：[1]北京全路通信信号研究设计院集团有限公司,北京100070

出　　处：《铁路通信信号工程技术》2022年第4期43-46,57,共5页Railway Signalling & Communication Engineering

基　　金：北京全路通信信号研究设计院集团有限公司科研项目(2300-K1210045.01)。

摘　　要：在轨道交通通信系统中功分器、合路器被广泛应用,基于超宽带通信系统,依据宽带Wilkinson功分器设计理论,利用微带结构平面易共形特点,设计一种C波段微带形式宽带Wilkinson一分八等分功分器,要求覆盖的频率范围为5.15~5.85 GHz,端口隔离度优于20dB,各端口输出幅度差异小于0.15 dB,相位基本无差异。In rail transit communication systems, power dividers/combiners are widely used. Based on the EUHT system and the design theory of wideband Wilkinson power dividers, and taking advantage of the easily-conformal and planar characteristics of microstrips, this paper designs a C-band microstrip wideband Wilkinson eight-way power divider, in order to cover the frequency range from 5.15to 5.85 GHz. The resulting port isolation is better than 20dB;the difference in output amplitude is less than 0.15dB and there is no phase difference between outputs.

关 键 词：功分器 Wilkinson 端口隔离度 幅度一致性 相位一致性 

分 类 号：U285.2[交通运输工程—交通信息工程及控制]