螺旋立铣刀切削力建模分析及加工优化研究  

Research on Cutting Force Analysis and Optimization of Milling Process of Cylindrical End Mill

作　　者：魏俊立 李曦[2] 黄伟建 WEI Jun-li;LI Xi;HUANG Wei-jian(China Academy of Engineering Physics,Institute of Machinery Manufacturing Technology,Sichuan Mianyang 621999,China;Huazhong University of Science and Technology,The Institute of Mechanical Science and Engineering,Hubei Wuhan 430074,China)

机构地区：[1]中国工程物理研究院机械制造与工艺研究所,四川绵阳621999 [2]华中科技大学机械科学与工程学院,湖北武汉430074

出　　处：《机械设计与制造》2022年第4期118-121,125,共5页Machinery Design & Manufacture

基　　金：军用调距桨及轴系等关键零部件加工设备换脑工程示范应用(2017ZX04011008-002)。

摘　　要：铣削加工中铣刀切削刃与工件的相互作用是一个快速、复杂的变化过程,且其受力变化是其它一切物理量变化的根源,因此研究在铣削加工过程中铣削力具有重要意义。这里研究了切削深度对切削力的影响,提出了一个快速反映切削力波动的切削系数。通过时域分析了在不同切削系数状况下的切削力波动与工件加工质量从而验证了方法的有效性。研究结果表明选择合理的切削系数可以降低切削力波动。因此可以通过选择合理的切削深度在保证加工质量的同时提高切削效率。The interaction between the cutting edge and the workpiece in milling is a rapid and complicated process,and the change of cutting force is the root of all other physical changes.Therefore,it is of great significance to study the milling force in the milling process.The effect of axial depth on the fluctuation of cutting force is studied.A cutting coefficient is proposed to quickly judge the fluctuation of cutting force.The validity of the method described in this paper is verified through the analysis of the time domain,and surface roughness.The experimental results show that the cutting efficiency and quality can be improved by selecting reasonable milling depth.

关 键 词：切削力 铣削深度 时域 粗糙度 

分 类 号：TH16[机械工程—机械制造及自动化] TG506[金属学及工艺—金属切削加工及机床]