管状三维复合材料增强体结构设计研究  

Design of Reinforced Structure on 3D Tubular Composites

作　　者：闵尔君 宋路平 芮章俊 朱求是 王旭 MIN Er-jun;SONG Lu-ping;RUI Zhang-jun;ZHU Qiu-shi;WANG Xu(College of Textile and Clothing,Anhui Polytechnic University,Wuhu Anhui 241000,China;Wuhu Hangfei Science and Technology Company Limited,Wuhu Anhui 241000,China)

机构地区：[1]安徽工程大学纺织服装学院,安徽芜湖241000 [2]芜湖航飞科技股份有限公司,安徽芜湖241000

出　　处：《武汉纺织大学学报》2022年第2期8-11,共4页Journal of Wuhan Textile University

基　　金：航空用特种电缆附件材料技术研发合作项目(HX-2020-11-002);安徽省高校省级教学示范课程“织造学”(2020SJJXSFK)。

摘　　要：近年来,三维机织复合材料增强体结构设计得到了快速的发展,本文以平织机织造为基础,结合管状组织和三维组织提出一种管状三维复合材料增强体结构的设计方法。分别以贯穿角联锁组织和贯穿正交组织为表组织,运用底片翻转法获取里组织,并将表里组织按照1:1嵌入,得到管状三维组织上机图。通过小样试织,结果表明本文提出的管状三维组织设计方法可行,为开发管状三维复合材料增强体提供了参考。In recent years, three-dimensional woven composite reinforcement structure has been developed rapidly. Based on normal shuttle loom, combined with tubular tissue and three-dimensional tissue, a design method of tubular three-dimensional composite reinforcement structure is proposed in this paper. By taking the through angle interlocking organization and through orthogonal organization as the surface organization respectively, the inner organization is obtained by the negative turnover method,and the surface and inner organization is embedded according to 1:1 to obtain the computer drawing of tubular three-dimensional organization. Through the trial weaving of small samples, the research result shows that the tubular three-dimensional structure design method proposed in this paper is feasible, which provides a reference for the development of tubular three-dimensional composite reinforcement.

关 键 词：管状三维机织物 结构设计 角联锁组织 贯穿正交组织 

分 类 号：TS101.922[轻工技术与工程—纺织工程]